ZoneTherm combines seven OpenTherm thermostats, configurable valve groups and W5500 Ethernet for local zone control and Home Assistant integration.
How Does ZoneTherm Use W5500 to Connect Seven OpenTherm Heating Zones?
Benjamin
Views 96
Comments 0
UCC
User Created Content: projects that makers and community members built with WIZnet chips and modules.
15 projects
A Bengbu University patent application links RS-485 sensors to a GD32F303CET6 gateway that packages data as MQTT and sends it through W5500 Ethernet.
How Does a W5500 Gateway Convert Modbus Sensor Data to MQTT?
BenjaminViews 204
Comments 0
Haljion shows Raspberry Pi Pico 2W using Adafruit W5500 over SPI and CircuitPython MiniMQTT to subscribe to a local broker over wired LAN.
How Does Pico 2W Use W5500 Ethernet for CircuitPython MQTT?
BenjaminViews 191
Comments 0
netclient
netclient
masonViews 167
Comments 0
A production-grade firmware architecture that brings together MQTT, Wiegand readers, RS485 devices, I2C LCD, RTC, and SD card storage — all running on a single
Building an Industrial Access Control Gateway with WIZnet W6300-EVB-Pico2
lawrenceViews 566
Comments 0
W5500 Ethernet connects an ESP32-C3 Zigbee coordinator to a Raspberry Pi MQTT broker, letting XBee3 relay nodes switch AC loads reliably without Wi-Fi.
How to Build a Zigbee Smart Switch System with W5500 Ethernet Backhaul on ESP32-C3?
BenjaminViews 634
Comments 0
W5500 PoE node reports drainage volume over MQTT and UECS-CCM.
W5500 PoE Drainage Gauge for Smart Irrigation
BenjaminViews 282
Comments 0
Arduino Pro Mini uses W5500 Ethernet for MQTT light state and UDP dimming control.
Arduino W5500 Rotary Light Control for Home Assistant
BenjaminViews 575
Comments 0
ControllersTech is a well-known embedded tutorial platform focused on STM32 and MCU development, offering step-by-step guides and YouTube videos.
ControllersTech Shows How W5500 Enables Reliable Ethernet on STM32 from DHCP to MQTT
jakeleeViews 397
Comments 0
STM32F103C8T6 Blue Pill + WIZnet W5500 Ethernet: MQTT communication test for an industrial MODBUS IoT gateway project built with STM32CubeIDE and HAL.
STM32 + W5500 MQTT Client — Industrial MODBUS IoT Gateway (WNR-MB-SEDE1)
irinaViews 518
Comments 0
Custom PCB with STM32F407 and W5500 for remote MQTT control of satellite LNB polarization, DiSEqC motor positioning, and IF signal routing over Ethernet.
TM32F407 + W5500: Ethernet-Connected DiSEqC Satellite Motor Controller
BenjaminViews 415
Comments 0
Build a reliable Ethernet IoT camera using W6300-EVB-PICO2 (RP2350). This project verifies WIZnet's CircuitPython QSPI driver for stable industrial monitoring.
Building a Stable Ethernet IoT Camera with W6300-EVB-PICO2 & CircuitPython
Grace_KooViews 1404
Comments 0
3-year field-proven IIoT Gateway using W5500 & RT-Thread. Zero downtime Modbus-to-MQTT solution on low-cost MCUs.
Zero Downtime for 3 Years: A Battle-Tested Industrial IoT Gateway with W5500 & RT-Thread
Grace_KooViews 557
Comments 0
Bridges CAN bus to MQTT using ESP32-C3 and W5500, enabling remote industrial monitoring and control.
ESP32-C3 + W5500 + CANbus
Grace_KooViews 1141
Comments 0
Industrial gateway solution based on STM32 and W5500, supporting multiple protocols (Modbus TCP/RTU/ASCII, BACnet/IP, MQTT) for building automation and IIoT.
Industrial Multi-Protocol Gateway (MTGateway)
BenjaminViews 1410
Comments 0