UCC

Control smart devices like LEDs and sensors via a web interface using WIZnet's W5500 Ethernet controller and STM32.

AVR-W5100

IoT47 project utilizing ESP32 and W5500 chips provides internet connectivity solution based on practical knowledge from Vietnamese IoT blog.

Do not Miss the IoT Module by Wiznet with RP2040 and Ethernet

How to integrate the Altivar atv12 inverter into the Blynk IoT

Surat factory WiFi is unreliable, so the EaseEmbro MES gives its ESP32-S3 fingerprint terminal a W5500 wired Ethernet option. The platform runs 33 factories.

A peer-reviewed 2026 paper wires an ESP32, three PZEM-004T sensors, and a W5500 Ethernet module into the BMKG Sleman station LAN to log 3-phase kWh in MySQL.

In this open KiCad gateway an ADIN1110 holds the 10BASE-T1L pair and a W5500 carries it onto standard Ethernet, both on one ESP32-S3 over separate SPI buses.

hexinttp's ESP-IDF firmware maps Modbus RTU and TCP registers to named points, publishes them over MQTT, and serves 11 MCP tools, with W5500 as default route.

Alexey Titov's Eva node fits a wall box by splitting in two: sensors and a W5500 on the front PCB, RJ45 and a PoE module on the back.

YamBMS is an ESPHome project that merges parallel BMS units into one battery for the inverter. Its two ESP32-S3 Ethernet board files both configure a W5500.

BREMA firmware makes busware's TUL KNX stick answer MCP over HTTP, so an agent can commission KNX devices. A PoE W5500 extension is the wired path.

STM32F103 firmware adds a W5500 SPI port, FreeRTOS tasks, and custom MQTT transport for wired OneNET sensor telemetry.

Bruce Lam's Go LwM2M server covers CoAP, DTLS-PSK, registration, read/write, and observe flows, with W5500 Ethernet tested through Zephyr.

ESP32 firmware uses W5500 Ethernet for local REST, MQTT, and Redfish control of a home server, router, and NAS from TV and web dashboards.

스마트 홈 시스템을 위한 구조 선택

In this paper, we propose an IoT device cyber physical resiliency approach using a cross-domain device replication that can replicate and securely transfer the

Remote control your robot with Kinect motion recognition + W5100 Ethernet 🚀.

Serial to Ethernet Converter with WIZ750SR, Remote Control Support 🚀

Using WIZnet W5500, this project builds a secure open-source gateway for industrial PLCs, integrating Apache PLC4X and MyNewt RTOS.

This project provides an Ethernet MAC driver for the W5500 chip, optimized for Arduino Mbed Core boards.

A Particle library for the NCD Particle Ethernet Overlay shield.

01- W5500 Socket API

Make loopback server using STM32CubeMX with W6100-EVB, you make ipv6 using WIZnet W6100 Hardwired TCP/IP chip