Skip to content

Setting up a FreeRTOS Example on STM32 Nucleo Board using W5300 TOE for AWS IoT Connection

This guide details how to configure and test a FreeRTOS example to connect to AWS IoT

scarlet

Published June 19, 2023

96 UCC

12 WCC

20 VAR

1 Followers

Setting up a FreeRTOS Example on STM32 Nucleo Board using W5300 TOE for AWS IoT Connection

Components

Hardware components
W5300-TOE-Shield

WIZnet - W5300-TOE-Shield

x 1

Project description

How to Test Connection to AWS IoT using freeRTOS Example Step 1: Prepare software The following serial terminal program is required for Connection to AWS IoT with a freeRTOS example test, download and install from below link. Tera Term Step 2: Prepare hardware Combine W5300 TOE Shield with STM32 Nucleo429ZI board. Connect ethernet cable to W5300 TOE Shield ethernet port. Connect STM32 Nucleo-144 board to desktop or laptop using 5 pin micro USB cable. Step 3: Setup AWS IoT In order to connect to AWS IoT through freeRTOS, the development environment must be configured to use AWS IoT. This…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.