Nucleo + W5500 Tutorial ( UDP to transfer DS18B20)

ronpang

Published February 28, 2022

164 UCC

109 WCC

12 VAR

2 Followers

Original source (new tab)

Components

Hardware components

Nucleo

x 1

Project description

This is a tutorial / educational article that showed how to implement W5500 into Nucleo solution. It shows all the coding and progress from Handling SPI interface to send data using UDP interface

Comments

Similar projects you might like

Arduino Uno with W5500 HTTP display (light sensor + DHT11)

ronpang

Views 276
Comments 0

A standalone RP2350-based Reticulum Transport Node that connects W5500 Ethernet and SX1262 LoRa.

rp2350_reticulum_eth_node : Reticulum LoRa Transport Node with WIZnet W5500

lawrence

Views 29
Comments 0

An ESP32-S3 DMX box that receives Art-Net over UDP 6454 through a W5500 and drives two DMX512 universes via MAX485, for about $29,33 in parts.

DMX-Unit-DIY: W5500 Art-Net node and 2-universe DMX512 controller on ESP32-S3

josephsr

Views 34
Comments 0

A GPS 1 PPS pulse disciplines an ESP32-S3 clock to ~5 µs; the W5500 SPI Ethernet path is timestamped so LAN clients see 60–100 µs.

ESPHome GPS/PPS Stratum-1 NTP Server on ESP32-S3 with a W5500 Ethernet Timestamping Path

josephsr

Views 29
Comments 0

Rently's UL294 access panel for rental communities combines Wi-Fi, LTE-M, and BLE with a WIZnet W5500 that gives it a wired 10/100 Ethernet path to the cloud.

How Does the Rently Access Panel with Intercom Use W5500 for Wired Cloud Access Control?

ElenaLee

Views 25
Comments 0

Newsan Lab's ArchiNet adds W5500 wired Ethernet plus ESP32-S3 Wi-Fi/BLE to its mass-produced ARCHI RP2040 education board, with open KiCad files.

ArchiNet: Newsan's W5500 Ethernet and ESP32-S3 Connectivity Board for the ARCHI RP2040 Platform