IOT system ? Home automation (W5500 + STM32)
IOT system ? Home automation (W5500 + STM32)
0
IOT system ? Home automation (W5500 + STM32)
0
Boutronic’s JGA2060 lets a PLC and a web client read the same SDI-12 sensor over Ethernet. Firmware v1.0c also reports the age of each measurement.
How Does the Boutronic JGA2060 Share SDI-12 Sensor Data over W5500 Ethernet?
BenjaminViews 25
Comments 0
KinCony T64M maps 64 inputs and 64 MOSFET outputs to Home Assistant over its W5500, using KCS with MQTT discovery or ESPHome with the native API.
How Does KinCony T64M Connect 64 Inputs and 64 Outputs to W5500 Ethernet?
BenjaminViews 21
Comments 0
GrandPA Lighting gives stage operators two routes from a physical fader to a fixture: USB MIDI through Sunlite, or Art-Net over Ethernet to a DMX node.
How Does the GrandPA Lighting Console Send Stage Cues over W5500 Ethernet?
BenjaminViews 27
Comments 0
The eBUS Adapter Shield C5 pairs optional W5500 Ethernet with an ESP32-C5 that can decode heating messages for MQTT and HTTP using a micro-ebusd token.
How Does the eBUS Adapter Shield C5 Bring Heating Data to W5500 Ethernet?
BenjaminViews 25
Comments 0
Deye identifies the W5500 in a GB-W fault code. Its power distribution unit has separate connections for web monitoring, inverter data and local setup.
Where Does the W5500 Fit in the Deye GB-W Battery Monitoring System?
BenjaminViews 23
Comments 0
RP2040 + W5500 LED controller in Rust: receives sACN (E1.31) over Ethernet and drives 8 WS2812B outputs; open PCB and MIT license.
hydra-nano
TheoImViews 88
Comments 0
Purdue OATS road research pairs LabJack/NATS monitoring with a separate STM32/W5500 design; field deployment and sensor-data Ethernet transfer are unconfirmed.
Avena-RS — W5500 Sensor Board Development for Road Research
Lihan__Views 58
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?