Wi-Fi module controlled with AT commands over UART.
60 projects, page 1 of 3
A telescope-automation maker uses WizFi360 AT commands, UDP discovery, and HTTP/JSON responses to expose a custom astronomical device to N.I.N.A. over a local.
How Does WizFi360 Connect a DIY ASCOM Alpaca Cover Calibrator to N.I.N.A.?
TheoIm
Views 168
Comments 0
The A2560Me pairs a Motorola MC68LC060 with WIZnet's W6100 and WizFi360, offloading IPv4/IPv6 TCP/IP to hardware on a 66 MHz legacy CPU.
Foenix Labs A2560Me Brings MC68LC060 CPU, FPGA Graphics, and PCIe Expansion
Grace_KooViews 369
Comments 0
Cortex-M4F driver framework using WizFi360-PA over UART to enable MQTT via Wi-Fi, offloading TCP/IP from the MCU for modular embedded control systems.
cSTER-devices
TheoImViews 297
Comments 0
Relay-Flask-MQTT-WizFi360
Relay-Flask-MQTT-WizFi360
TheoImViews 314
Comments 0
F256-Wizfi360
F256-Wizfi360
TheoImViews 245
Comments 0
Wireless, Low-Cost, and Portable EMG System
Wireless Data Acquisition - Wireless, Low-Cost, and Portable EMG System
HannahViews 381
Comments 0
A prototype smart exhaust fan controlled by MCXN236 + WizFi360 + BME688 that adjusts fan operation based on air quality (VOC).
TinyML enabled Low Power Exhaust Fans for Smart Buildings
Lihan__Views 418
Comments 0
Cloud Pixel : Record the lottery results of previous periods and make statistics to see which number appears the most often.
Lottery Monitor (Hong Kong Mark Six Lottery) - Cloud Pixel
gavinchangViews 4369
Comments 0
A Microsoft MakeCode package for Grove Uart WizFi360. This is a module similar to Grove Uart WiFi v2.
pxt-grove-uart-wizfi360
louis_mViews 394
Comments 0
Digital QR Scanner (QR Code Recorder & QR Code Classify & Chip Counter all in one )
Digital QR Scanner (QR Code Recorder & QR Code Classify & Chip Counter all in one )
gavinchangViews 4007
Comments 0
Cloud Motion is a 2-degree-of-freedom network gimbal.3D Laser Radar is the first application on Cloud Movtion, which work with Cloud Pixel.
3D Laser Radar: "Cloud Motion" work with "Cloud Pixel"
gavinchangViews 6622
Comments 0
wiznetfi360-ota
wiznetfi360-ota
masonViews 241
Comments 0
Dynamic scanning of lidar is performed through 2-degree-of-freedom network gimbal to form a 3D photo containing distance information.
3D Laser Radar Tower based on 2-degree-of-freedom network gimbal (POE+PICO)
gavinchangViews 7170
Comments 0
In order to use Cloud Printer with PC, I use Chatgpt to help develop a Python program, which can use Cloud Printer to print any text
AnyPrint：Print any Text by Cloud Printer
gavinchangViews 7936
Comments 0
Make a Digital Safe Box using Raspberry Pi RP2040 ,Fingerprint, Servo, OLED, Buzzer and W5100S Wizfi360 .
Digital Safe Box (RP2040+W5100S+FingerPrint) Part 2 (Finished)
gavinchangViews 6745
Comments 1
Микроконтроллеры STM32: выходим в сеть с Wiznet W5500
IoT Gateway : W5500 + Raspberry Pi Pico + WizFi360
luca__________Views 332
Comments 0
I want to develop a RP2040-based IP camera, and do application development based on the cloud platform.
Cloud Camera(Raspberry Pi RP2040 + w5100s + POE) Part 1：Hardware
gavinchangViews 7091
Comments 0
HTU21DLibrary
HTU21DLibrary
masonViews 234
Comments 0
WizFi360 Smart Farm Project
WizFi360 Smart Farm Project
WIZnetViews 246
Comments 0
I propose to utilize the existing wiznet chip to perform AI projects using ChatGPT.
Provide solutions to help organizations adopt A.I. technologies
simonsViews 251
Comments 0
Print all the conversation process with ChatGPT and store it in the SD card
ChatGPT Recorder & printer(Raspberry Pi Pico & WizFi360)
gavinchangViews 5810
Comments 0
WizFi360 Library setting
OrangeBoard WiFi+ 펌웨어 업데이트 하기 – Upgrade tool 사용
WIZnetViews 226
Comments 1
Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module, which is a cost-effective WiFi module that supports both TCP/IP and microcon
Grove UART WizFi360
gavinchangViews 555
Comments 0
Project to connect to AWS cloud using WizFi360
AWS_MQTT_LPCXpresso55S69_WizFi360_WiFi_RTX
WIZnetViews 431
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
