Skip to content

High-Performance Ethernet Control with W5500 in Rust: Minimal TCP/IP Offload for Embedded Devices

A lightweight Rust driver for the WIZnet W5500 Ethernet chip using SPI. Designed for no_std embedded systems with built-in TCP/IP offload (TOE).

matthew

Published April 17, 2025

Original author: Alex Martens · CanadaOriginal source (new tab)

High-Performance Ethernet Control with W5500 in Rust: Minimal TCP/IP Offload for Embedded Devices

Components

Hardware components

WIZnet parts

Project description

🧩 Overview This project introduces a lightweight and high-performance Rust driver for the WIZnet W5500 Ethernet chip, designed for embedded systems with constrained resources. By leveraging WIZnet’s hardware TCP Offload Engine (TOE), developers can implement robust Ethernet networking with minimal overhead—ideal for applications such as IoT, automation, and real-time monitoring. 🛠️ Hardware Setup Ethernet Chip: WIZnet W5500 Interface: SPI (Serial Peripheral Interface) Target Platforms: MCU boards that support embedded-hal, including STM32, RP2040, nRF52, etc. Power Consideration: 3.3V…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like