LE-100PRO
RS232/422/485 to LAN(10/100M) 컨버터(32bits, Cortex M3, W6100)
4
Project description
Serial data transfer to TCP/IP (Cortex M3, 32bit, W6100)
RS232/422/485 to LAN(10/100M) 컨버터(32bits, Cortex M3, W6100)
4
Serial data transfer to TCP/IP (Cortex M3, 32bit, W6100)
MESHBULLET is a DIY Meshtastic node that gives a Pico 2 (RP2350) a wired Ethernet and PoE uplink with WIZnet wiz850io or W6100, in a 3D-printed tube.
MESHBULLET: How to Add Wired Ethernet and PoE to a Meshtastic RP2350 Node with WIZnet W6100
BenjaminViews 534
Comments 0
Pico Modbus는 WIZnet W6100-EVB-Pico2 보드에서 동작하는 Modbus TCP Server 프로젝트
Pico Modbus TCP Server
sophiaViews 234
Comments 0
Pico clients use W6100 TCP sockets to upload SGP30 and SGP41 gas data.
W6100 TCP Air Quality Clients for Pico
BenjaminViews 437
Comments 0
micro-ROS bridge on RP2040 + WIZnet W6100 forwarding ROS2 cmd_vel to a Sabertooth 2x60 motor driver, with Ethernet UDP transport planned.
SabertoothMicroROSBridge
Grace_KooViews 206
Comments 0
An open-source retro SBC built on the W65C816 CPU, using WIZnet W6100 to add hardwired TCP/IP Ethernet connectivity.
X65_BigMiST
Grace_KooViews 224
Comments 0
The A2560Me pairs a Motorola MC68LC060 with WIZnet's W6100 and WizFi360, offloading IPv4/IPv6 TCP/IP to hardware on a 66 MHz legacy CPU.
Foenix Labs A2560Me Brings MC68LC060 CPU, FPGA Graphics, and PCIe Expansion
Grace_KooViews 369
Comments 0
A Cortex-M4 controller offloads wired Ethernet and dual-stack UDP handling to W6100 over SPI to reduce software stack burden and stabilize embedded network.
SPI-Based Network Offload for Dual-Stack UDP on Cortex-M4
josephsrViews 251
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?