[아두이노#549] 이더넷(ethernet)쉴드(W5100)를 아두이노(arduino)에 연결해서 MQTT와 TCP서버(server) 구현해보기!(2부)

arduino

bruno

Published February 15, 2023

190 UCC

Original author: 심심한녹칸다 · South KoreaOriginal source (new tab)

Project description

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Naset RNS216M is a six-port HF/50 MHz coaxial switch using W5100S-EVB-Pico2 for browser-based LAN control, local switching, and automatic grounding.

GND接続機能付リモート同軸切替器 RNS216M (Naset RNS216M: A W5100S-EVB-Pico2-Based 6-Port Remote Coaxial Switch)

Appletini ONE is a Zynq-7020 Apple //e card. Its MCP server reads the live screen over UART, and a WIZnet W5100S carries the virtual Uthernet II.

How Does Appletini ONE Serve a Real Apple //e as MCP Tools with a W5100S on the Bus?

PICOTTY turns Raspberry Pi Pico or Pico 2 boards into networked serial-console nodes for headless computers.

How to Build a Networked Serial Console with WIZnet W5100S on Raspberry Pi Pico?

This guide shows how to build and test a light-controlled LED system using Blockless and the W5100S-EVB-Pico.

Quick Start with Blockless to Realize Hardware Creations

A Java 21 robotics stack linking Jetson control to ODrive motors through a W5100S Ethernet bridge with binary messaging and watchdog safety.

OneTouch: W5100S-Based Ethernet Motor Control and Robotics Messaging Stack

LoRa mesh networking platform designed to exchange text messages, location data, and telemetry without relying on Internet or cellular infrastructure

MESHCN Firmware: Extending an Off-Grid LoRa Mesh Network with W5100S Ethernet

CONTROL_POWER_MQTT: A 4-Channel Remote Power Control System Built on Arduino Mega and W5100/W5500

CONTROL_POWER_MQTT