Bootloader using W5100S-EVB
Bootloader with ethernet.
The server side of the bootloader becomes the PC and the W5100S-EVB becomes the client.
4
Bootloader with ethernet.
The server side of the bootloader becomes the PC and the W5100S-EVB becomes the client.
4
ARM Cortex-M MCU OS
yss Embedded Operating System
taylorViews 8948
Comments 4
The developer has submitted Pull Request #12232 to the official Meshtastic firmware repository, proposing Ethernet and PoE support for the RAK3312 platform.
meshtastic-rak3312-ethernet : Enabling Ethernet and PoE on Meshtastic RAK3312 with WIZnet W5100S
lawrenceViews 92
Comments 0
Rosette runs a DDSI-RTPS stack and rmw_rosette on bare-metal RP2350, using W5100S hardware UDP sockets so stock Fast DDS sees the board as a ROS 2 node.
How Does Rosette Put an RP2350 + W5100S Board on a ROS 2 Network Without a micro-ROS Agent?
Grace_KooViews 45
Comments 0
1984: An Amstrad CPC Emulator That Recreates the W5100S of Cyboard and Net4CPC Down to the Register Level
1984
scottViews 198
Comments 0
Cyboard: An Open-Source SYMBiFACE II-Compatible Board That Brings the 1984 Amstrad CPC Online with the W5100S
cyboard-for-cpc
scottViews 79
Comments 0
Custom RP2354B computer runs its own OS and drives WIZnet W5100S directly over SPI, implementing hardware sockets, blocking I/O, and a TCP server.
Driving WIZnet W5100S Without an SDK on a Custom RP2354B
irinaViews 143
Comments 0
Naset RNS216M is a six-port HF/50 MHz coaxial switch using W5100S-EVB-Pico2 for browser-based LAN control, local switching, and automatic grounding.
GND接続機能付リモート同軸切替器 RNS216M (Naset RNS216M: A W5100S-EVB-Pico2-Based 6-Port Remote Coaxial Switch)
matthewViews 163
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?