Skip to content

Arduino Component Restarter With Temp Output Using Cayenne

This could be used to turn anything off for 10seconds and then back on automatically. As for the temp sensor the DS18B20 temp sensor is real

WIZnet

Published February 21, 2023

Original author: MakrToolboxOriginal source (new tab)

Arduino Component Restarter With Temp Output Using Cayenne

Components

Hardware components

Project description

DETAILS Step 1: Gathering Your Materials Arduino UNO –Amazon $10 OR EBAY ABOUT $5 Relay- I used This one because i had it and it has outlets- Amazon has them for $20 Arduino 5100 Ethernet Shield –Amazon $10 DS18B20 Temp Sensor —Amazon 5 for $12! 4.7k Resistor x 1 Uno power supply — any 5v to 9v power supply should work, or u can purchase a specially made arduino power supply. Arduino IDE Cayenne ——- Cayenne is a free service that allows easy Internet Of Things programming and monitoring. If you have never used it, it is very easy to start using with either a raspberry pi or arduino. Step 2…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like