How Does Senbrino Turn AI-Edited Ladder Logic Into an Arduino Sketch on a W5500 PLC Board?
Going's Senbrino ladder IDE has an MCP server inside, so an AI edits the ladder itself. Senbrino then builds Arduino C++ for a W5500 Modbus TCP board.
0
Components
Hardware components
WIZnet - W5500
x 1
Ethernet controller on Going's GO-RP2040-CB08 main board, named in the Senbrino supported-boards table as "Ethernet (W5500)". It carries the Modbus TCP slave that the sample project binds to local por
Project description
A Ladder Editor That Hands the Program Over to an AI GOING Co., Ltd. is a Seoul control-systems company with three product lines on goingiot.co.kr: SEN devices, the GCON modular Arduino PLC hardware, and QCON stage control. Senbrino PLC is Going's Windows toolchain for the GCON side, described in its own README as "a ladder-logic development environment that turns Arduino-compatible boards into a PLC". The interesting part is not that Senbrino talks to an AI, but what the AI is given to work on: the ladder diagram itself, rather than firmware or registers. The Senbrino ladder editor with a…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
