Skip to content

ESP32 GPS Test with W5500

A project testing GPS data using the ESP32 chipset and testing Ethernet communication with the W5500 chip.

Benjamin

Published June 07, 2023

Original author: Dev-91 · South KoreaOriginal source (new tab)

ESP32 GPS Test with W5500

Components

Hardware components

Software Apps and online services

x 1

WIZnet parts

Project description

Overview The above project focuses on obtaining and processing location information using the ESP32 development board and a GPS module, with the addition of Wiznet's W5500 to implement ioT over an Ethernet connection. W5500 in code #if CONFIG_USER_ETH_W5500_ENABLE == 0 // ethernet init &connection ESP_LOGI(TAG, "CONFIG_USER_ETH_W5500_ENABLE: %d", CONFIG_USER_ETH_W5500_ENABLE); spi_eth_module_config_t ethcfg = { .spi_cs_gpio = USER_ETH_SPI_CS_GPIO, .int_gpio = USER_ETH_SPI_INT_GPIO, .phy_reset_gpio = USER_ETH_SPI_PHY_RST_GPIO, .phy_addr = USER_ETH_SPI_PHY_ADDR_GPIO, }; ethernet_init(&ethcfg)…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like