STM32F103C8T6 (Blue Pill) + W5500 Multi-Display IoT Starter
How do you control Ethernet, LCD, and LED Matrix all at once with a $1 STM32 Blue Pill?
Benjamin
Views 416
Comments 0
UCC
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,465 projects
Vajravolt VVM701
Vajravolt VVM701
AlanViews 438
Comments 0
A Linux-based system brings puppets to life by synchronizing servo movements with audio. ESP32 network nodes with W5500 Ethernet enable scalable, real-time cont
Open-Source Animatronic Puppet Control System with Distributed Network Nodes
Lihan__Views 451
Comments 0
ESPHome 🧠 MultiSensor Board
ESPHome MultiSensor Board
AlanViews 580
Comments 0
An ESP32 relay controller combining WiFi and W5500 wired Ethernet on a single-layer PCB.
ESP32-Based 8-Channel Relay Control System with W5500 Ethernet LAN
Lihan__Views 495
Comments 0
MockingBoard + Uthernet II = Music!
MockingBoard + Uthernet II = Music!
jadenViews 306
Comments 0
STM32L152 + ESP32 Wroom 보드
STM32L152 + ESP32 Wroom 보드
jadenViews 358
Comments 0
This project implements a 4-channel cloud-controlled switch using the OneNET cloud platform and the HTTP protocol.
How to Build a Reliable HTTP-Based Cloud Switch Controller with W5500 and OneNET?
ronpangViews 303
Comments 0
W5500-EVB-PICO is an evaluation board that combines the RP2040 microcontroller with the WIZnet W5500 Ethernet controller.
How Does W5500-EVB-PICO Enable Reliable Ethernet Networking for RP2040 Projects?
ronpangViews 293
Comments 0
This project demonstrates an RP2040-based embedded system using the WIZnet W5500 Ethernet controller to achieve reliable, wired TCP/IP communication.
How to Build a Stable Ethernet-Based Industrial IoT Node with RP2040 and W5500?
chenViews 363
Comments 0
W5500 and new network tab
W5500 and new network tab
gunnViews 351
Comments 0
Teensy 4.1 - W5500 using SPI DMA
Teensy 4.1 - W5500 using SPI DMA
gunnViews 360
Comments 0
ESP-NODE-2RDM is an ESP32-S3 Art-Net v4 / sACN (E1.31) node that outputs two DMX512/RDM ports with multi-source merging. It uses a WIZnet W5500 SPI-Ethernet.
How to Build a Dual-Port Art-Net v4 / sACN to DMX512/RDM Node with WIZnet W5500 on ESP32-S3?
viktorViews 1213
Comments 0
This article explains how to debug common Ethernet failures when using the WIZnet W5500 with STM32 microcontrollers.
How Do You Debug Common W5500 Failures on STM32?
ArnoldViews 504
Comments 0
This project builds a pro-grade Art-Net (UDP) to WS2812 controller on RP2350, driving 12,288 LEDs across 12 outputs at 30+ FPS.
High-Performance ArtNet to WS2812 Controller
viktorViews 385
Comments 0
This article explains how an STM32 microcontroller communicates with the WIZnet W5500 Ethernet controller through SPI at the register level.
How Does STM32 Communicate with W5500 at the Register Level?
ArnoldViews 346
Comments 0
This article explains how to bring up Ethernet networking on the W5500-EVB-Pico using a static IP configuration.
How Do You Bring Up Ethernet with a Static IP on W5500-EVB-Pico?
ArnoldViews 451
Comments 0
C11-P04-F04-SE_RAMP
C11-P04-F04-SE_RAMP
TheoImViews 314
Comments 0
Optimized Arduino Code for controlling of my AstroShell Dome
astroshell
HannahViews 353
Comments 0
EME Rotator Controller
EME-CRTL-KGK-001
HannahViews 350
Comments 0
PR #178 aligns Wiznet5k sockets with CircuitPython core behavior, improving non-blocking/timeout reliability and consistency.
CircuitPython Wiznet5k: PR #178 Socket Reliability Update
Grace_KooViews 1053
Comments 0
Automated Car Parking
Automated Car Parking
Sunny_Views 620
Comments 0
How Do You Build an IPv4/IPv6 Gateway on STM32 Using W6100?
How Do You Build an IPv4/IPv6 Gateway on STM32 Using W6100?
gavinchangViews 502
Comments 0
This article explains how an ESP32 integrates with the WIZnet W6100 Ethernet controller using the official ioLibrary to implement a TCP client.
How Do You Build a TCP Client on ESP32 Using W6100 and ioLibrary?
gavinchangViews 461
Comments 0
