ESPHome MultiSensor Board
ESPHome 🧠MultiSensor Board
0
Components
Hardware components
WIZnet - W5500
x 1
Similar projects you might like
warp-core: A Hybrid Rocket Launch Controller Built on an 8-bit AVR and the W5500
warp-core
scott-
Views 38
-
Comments 0
Apollo Automation's $34.99 CAST-1 turns powered speakers into Music Assistant players; an optional W5500 HAT moves the stream to Ethernet with Wi-Fi fallback.
How Does Apollo CAST-1 Use a W5500 Ethernet HAT for Wired Sendspin Multi-Room Audio?
ElenaLee-
Views 77
-
Comments 0
Reverse-engineered BLE bridge: an ESP32-S3 reads pool pH and sets salt production on Sterilor XP units, and a W5500 sends it to Home Assistant over Ethernet.
How Does an ESP32-S3 and W5500 Bridge a Sterilor XP Pool Chlorinator to Home Assistant over BLE?
ElenaLee-
Views 176
-
Comments 0
TALLY-NODE connects video switchers through W5500 Ethernet, then sends camera tally states to LoRa receivers. The paid kit is available by inquiry.
How Does TALLY-NODE Use W5500 Ethernet and LoRa for Camera Tally Lights?
Benjamin-
Views 59
-
Comments 0
CO16 links 16 analog inputs, four multiplexed PT100 probes and relay control to Home Assistant through W5500 Ethernet and configurable firmware.
How Does KinCony CO16 Connect Analog Sensors to Home Assistant with W5500?
Benjamin-
Views 68
-
Comments 0
SLZB-Ultima connects dual smart-home radios through W5500 Ethernet, with distinct SLZB-OS and ESPHome setup paths and optional PoE expansion.
How Does W5500 Connect the SMLIGHT SLZB-Ultima Smart-Home Hub to Ethernet?
Benjamin-
Views 69
-
Comments 0
STM32F407 gateway using WIZnet W5500 for Modbus-to-MQTT monitoring, offline data buffering, OTA rollback, and automatic 4G failover.
stm32f407-iot-gateway
lawrence-
Views 101
-
Comments 0