This article explains how to perform network bring-up using the WIZnet W5500 Ethernet controller with both DHCP and static IP configurations.
How to Perform Network Bring-Up with W5500 Using DHCP or Static IP?
ronpang
Views 730

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,555 projects
This article explains how to perform network bring-up using the WIZnet W5500 Ethernet controller with both DHCP and static IP configurations.
How to Perform Network Bring-Up with W5500 Using DHCP or Static IP?
ronpangViews 730
Comments 0
MIRAGE uses WIZ850io(W5500) to send stratospheric methane data from ESP32-C5 to ground via UDP.
BX39_MIRAGE_SED
TheoImViews 406
Comments 0
In this tutorial, we will integrate the Mongoose networking library with the W5500 SPI-to-Ethernet module on an STM32F446RE microcontroller. This is useful beca
Ethernet on Any STM32 MCU
Sunny_Views 389
Comments 0
An Industrial IoT multi-channel actuator control system designed for 12V environments, integrating ESP32 with W5500 Ethernet PHY and efficient DC-DC power conve
Channel Actuator Controller Board
Sunny_Views 270
Comments 0
STM32 TCP client that fetches live weather data from Open-Meteo API using W5500 Ethernet. Displays temperature, wind, and location on 16x2 LCD with button contr
IoT Weather Station
Sunny_Views 270
Comments 0
네트워크 장애와 재전송 간의 엔지니어링 갈등: 산업용 사물 인터넷에서의 신뢰성 딜레마 및 실질적인 해결책
Industrial Offline Cache Gateway with WIZnet W5500: Why MQTT QoS2 Alone Cannot Prevent Data Loss
brunoViews 439
Comments 0
A practical use was also quickly found—namely, the remote control of parts of the amateur radio setup.
IO - Interface Connectivity (Webserver, MQTT)
brunoViews 351
Comments 0
A Japanese engineer's research diary evaluating WIZ-IP20 as a UART-to-Ethernet bridge for routing Pixhawk MAVLink telemetry over LTE, 5G, and Starlink in BVLOS
Bridging Pixhawk to LTE and Starlink: WIZ-IP20 in a Drone Multi-link Concept
BenjaminViews 1260
Comments 0
Two Arduino UNO nodes use W5500 Ethernet to send factory sensor data to ThingsBoard over HTTP.
Arduino W5500 Smart Factory Monitor for ThingsBoard
BenjaminViews 485
Comments 0
ESP32 LVGL touchscreen controller for Home Assistant, openHAB & more. MQTT-driven multi-page UI, W5500 wired Ethernet, OTA, web config, anti-burn-in.
openHASP — MQTT Touchscreen UI for Home Automation with W5500 Wired Ethernet
irinaViews 534
Comments 0
EMailSender Library
EMailSender Library
scottViews 377
Comments 0
https://www.reddit.com/r/vmix/comments/1spfev5/wip_building_a_custom_vmix_controller/
[WIP] Building a custom vMix controller
Grace_KooViews 266
Comments 0
A browser-based tool for configuring, compiling, and flashing OnStepX telescope firmware, including W5100/W5500 Ethernet options for SmartWebServer.
OnStepX-Configurator
matthewViews 436
Comments 0
The UCB_board project is a work-in-progress STM32H563VIT6 control board for SCPI, UART, USB, RS485, and wired Ethernet experiments in a 3U Eurocard form factor.
How to Add Wired Ethernet with W5500 on an STM32H563 Universal Control Board?
viktorViews 413
Comments 0
Flexible Birdhouse Camera System for Multiple Nests
Flexible Birdhouse Camera System for Multiple Nests
scottViews 598
Comments 0
A real-world use of W5500 in power grid safety, enabling real-time monitoring and predictive maintenance of electrical equipment.
From Ethernet Chip to Power Infrastructure Safety: W5500 in PD Monitoring Systems
sophiaViews 402
Comments 0
ESP web cam
Wired networking, PoE, and a self-powered web camera
jadenViews 303
Comments 0
Poseidon is keyboard-first firmware for the M5Stack Cardputer-Adv, built around an ESP32-S3. The project lists WIZnet W5500 as its SPI-to-Ethernet hardware hat
How to Add Wired LAN Transport with W5500 on M5Stack Cardputer-Adv?
viktorViews 669
Comments 0
An ESP32-S3 and W5500 Ethernet controller for monitoring solar thermal temperatures, controlling pumps, and logging system data through a local web UI.
ESP32_Solar_Thermal_Controller
matthewViews 377
Comments 0
where tumor tissues are selectively heated to approximately 42–44 °C using non-ionizing microwave radiation.
Design of an integrated control system for temperature focusing in microwave cancer hyperthermia
brunoViews 321
Comments 0
A no_std Rust library that lets MCU nodes publish and subscribe to ROS 2 topics over Zenoh, demonstrated with RP2040 + WIZ630io Ethernet.
zenoh-ros2-nostd
matthewViews 1237
Comments 0
An ESP32 zonal ECU prototype, developed on Ubuntu/Linux, using W5500 Ethernet to explore vehicle-style networking and early SOME/IP.
ZonalArchECU_W_SomeIP — A Scale-Model Zonal ECU Prototype with W5500 Ethernet Backbone
matthewViews 725
Comments 0
ESPHome 2026.4.0 - April 2026
ESPHome 2026.4.0 - April 2026
AlanViews 386
Comments 0
Converts Daktronics AllSport 5000 serial RTD into JSON/MQTT over wired W5500 Ethernet (< 12 ms RTT), powering live graphics, signage and smart-arena automations
dakbot
lawrenceViews 349
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?