UCC

ESPHome 2026.6.0 update

A development kit based on the ESP32S3 N16R8 DEV KIT C1 for energy management systems (EMS) with support for various communication protocols and peripherals.

Custom W5500-based Modbus TCP client enables EM540 energy meter integration with Victron Cerbo GX and VenusOS.

esparagus-snapclient-fork

W55RP20 pi-pico C/C++ SDK를 이용한 네트웍 스피커 제작 및 테스트

Rpi pico timer

This commercial prototype architecture uses an ESP32 running MicroPython with a WIZnet W5500 Ethernet module to add wired TCP/IP networking through SPI.

This robotics architecture describes how a MicroPython-based robot node can use WIZnet W5500 as a wired Ethernet controller for deterministic bench, field, and

This education-focused W5500 bring-up project explains how to connect a WIZnet W5500 Ethernet module to an MCU platform,

This maker project debugs the MicroPython wiznet5k.py driver used with WIZnet W5500 on an ESP32-based Ethernet node.

This commercial architecture uses WIZnet W5500 on W5500-EVB-Pico to build wired Ethernet prototypes with MicroPython.

This education-focused project shows how to build a wired Ethernet HTTP client using WIZnet W5500 on an ESP32 running MicroPython.

This Industrial IoT architecture uses WIZnet W5500 as a wired Ethernet controller for MCU-based commercial devices.

This robotics-oriented project connects an ESP32 MicroPython board to a WIZnet W5500 Ethernet module to add wired TCP/IP communication through SPI.

Monitor voltage, current, power and energy in real time using ESP32-S3, AI-ready analytics and Ethernet connectivity for industrial IoT applications.

An innovative XR-FreeD to UDP tracking system powered by Wiznet NanoBanana, enabling real-time, low-latency camera data stream for virtual production.

A high-performance actuator control platform combining TI C2000 and W6100 to deliver 100 μs real-time positioning, fault diagnostics, and Ethernet connectivity.

Repository dedicated to storing tests and experiments carried out with the STM32G0B0RET6 and the W5500 using the MQTT protocol.

STM32F103 + W5500 MQTT IoT Sensor Node

Generic firmware for ESP32-S3-POE-ETH-8DI-8DO and ESP32-S3-POE-ETH-8DI-8RO (possibly others as well, but untested)

This is an intelligent access control management system.

A portable cable tester using Pico W and W5500 MACRAW mode to capture LLDP frames and display connected switch info — manufacturer, port, and IP — on a 2×16 LCD

Bruce Lam's Go LwM2M server covers CoAP, DTLS-PSK, registration, read/write, and observe flows, with W5500 Ethernet tested through Zephyr.

ESP32 firmware uses W5500 Ethernet for local REST, MQTT, and Redfish control of a home server, router, and NAS from TV and web dashboards.