OpenDeck is an open-source MIDI and OSC controller platform for DIY control surfaces, sensor interfaces, and Ethernet-connected OSC nodes with W5500 support.
Open Deck
matthew
Views 371

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,555 projects
OpenDeck is an open-source MIDI and OSC controller platform for DIY control surfaces, sensor interfaces, and Ethernet-connected OSC nodes with W5500 support.
Open Deck
matthewViews 371
Comments 0
FPGA firewall (Arty Z7-20 + W5500) by a Romania-based author @StefanGutu. Detects IP/ARP spoofing with HW rule-based filtering and a WebSocket monitor.
Firewall_on_FPGA
irinaViews 248
Comments 0
The original project uses local AVR control, but community members recommended W55RP20 as a practical Ethernet upgrade for remote industrial control.
How W55RP20 Can Add Industrial Ethernet Control to an Automated Variac and Stepper System
jakeleeViews 289
Comments 0
A Zhejiang University patent uses STM32, AD7606, and W5500 Ethernet to stream 8-channel RF data into CNN-based drone detection.
How Does W5500 Stream 8-Channel RF Data for Drone Detection?
BenjaminViews 468
Comments 0
A Jiangsu University patent uses W5500 Ethernet to move CMOS pest images from an MCU capture node to a PC and cloud MDRN classifier.
How Does W5500 Ethernet Support an AI Grain-Pest Patent?
BenjaminViews 462
Comments 0
A+n underwater ROV control workspace combining STM32F407 actuator firmware, a PyQt operator station, YOLO-based barnacle vision, and a W5500 UDP FW path.
CMVC_B: STM32F407-Based ROV Control Firmware with W5500 UDP Communication
josephsrViews 352
Comments 0
An STM32F103 gateway uses W5500 Ethernet and MQTT to receive remote motor commands, then routes them to stepper motor drivers through CAN or RS485/Modbus.
(temp) STM32F103 W5500 MQTT Gateway for CAN and RS485 Motor Control
josephsrViews 455
Comments 0
Power-Meter-2 measures household energy usage by detecting the blinking pulse of an existing electricity meter and serving calculated power data through a W5500
(temp) STM32F103 and W5500 Pulse-Based Home Power Meter
josephsrViews 223
Comments 0
완성 제품보다 임베디드 IoT 학습·포트폴리오형 저장소
(temp) Full-Stack Embedded System: ESP32-S3 W5500 Ethernet and Automatic Irrigation Control
josephsrViews 201
Comments 0
Never Lose a Reading: An ESP32-S3 + W5500 Remote Monitoring System for a Vietnamese Hydropower Station
esp_thuydien
scottViews 277
Comments 0
This paper proposes an application anomaly detection and bottleneck identification system (AAD-PSC) based on cloud platform service components.
Research on Data Operation Monitoring and Analysis System of Computer Intelligent Cloud Platform
brunoViews 238
Comments 0
PiKVM
PiKVM
masonViews 263
Comments 0
Nova---a-LoRa-Mesh-System
Nova---a-LoRa-Mesh-System
masonViews 379
Comments 0
This article explains a firmware-oriented Industrial IoT Ethernet design using the WIZnet W5500 as a TCP server with keepalive handling.
How to Build a Reliable Industrial TCP Server with WIZnet W5500 on an MCU Platform?
gavinchangViews 424
Comments 0
This article explains an education-oriented WIZnet W5500 Ethernet project with a focus on registers.
How to Teach W5500 Register-Level Ethernet Control with WIZnet W5500 on ESP32?
gavinchangViews 214
Comments 0
Custom ESPHome component use with SensoStar module
esphome-sensostar
Sunny_Views 259
Comments 0
This article explains an education-oriented FPGA Ethernet architecture based on WIZnet W5500 and Verilog.
How to Teach FPGA Ethernet Architecture with WIZnet W5500 on an FPGA Platform?
markViews 209
Comments 0
A standalone MQTT 3.1.1 broker that runs entirely on a $10 microcontroller. No cloud. No Pi. No Docker. Plug it in.
ESP32 MQTT Broker
Sunny_Views 199
Comments 0
This article explains a firmware-oriented Maker project based on STM32F4, WIZnet W5500, TCP server operation, and standard Modbus communication.
How to Build a Maker Modbus TCP Server with WIZnet W5500 on STM32F4?
markViews 284
Comments 0
A robust, ultra-low latency, and "Plug & Play" interactive art sensor pipeline. This project reads 24GHz FMCW radar data from an AI-Thinker RD-03 sensor via an
Van Phu Human Radar
Sunny_Views 228
Comments 0
An nRF5340 IoT gateway funneling BLE data over W5100S wired Ethernet, with PoE for data and power on one cable.
repeat
Grace_KooViews 237
Comments 0
This article explains a MicroPython Ethernet node architecture using an ESP32-class MCU and the WIZnet W5500, with broad coverage across network stack behavior,
How to Build a Multi-Use MicroPython Ethernet Node with WIZnet W5500 on ESP32?
ArnoldViews 206
Comments 0
This article explains a commercial-oriented MicroPython Ethernet node using an ESP32-class MCU and the WIZnet W5500
How to Build a Commercial High-Performance MicroPython Ethernet Node with WIZnet W5500 on ESP32?
ArnoldViews 209
Comments 0
This article explains a commercial-oriented MicroPython Ethernet node architecture using an RP2040-class MCU and the WIZnet W5500.
How to Build a Commercial MicroPython Ethernet Node with WIZnet W5500 on RP2040?
ronpangViews 204
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?