ZigBee Coordinator
ZigBee Coordinator
jaden
Views 171

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,555 projects
ZigBee Coordinator
ZigBee Coordinator
jadenViews 171
Comments 0
An open KiCad board merges four serial lines into one Ethernet feed on a W55RP20, driving ioLibrary hardware sockets directly with no lwIP in the build.
How Does a Wires-First UART Combiner Move Four Serial Streams Over W55RP20 Ethernet?
AlanViews 228
Comments 0
ESP32-based IMU sensor device for the natKit BCI toolkit. This device collects inertial measurement data and streams it to the natKit backend via MQTT.
natKit-IMU
Lihan__Views 271
Comments 0
Use esp32-s3-poe-eth to connect to Tesla Powerwall AP and proxy requests to ethernet
esp32-wifi-bridge
Lihan__Views 245
Comments 0
UC Berkeley's student rocket team, Space Enterprise at Berkeley (SEB), builds an Automatic Electronic Pressure Regulator (E-Reg)
AutomaticElectronicPressureRegulator
lawrenceViews 206
Comments 0
Weidos doesn't use the W5500 as a plain Ethernet PHY/interface. Its official Ethernet.h-based library talks directly to the W5500's hardware TCP socket (TOE).
Weidos-ESP32-package
lawrenceViews 240
Comments 0
OpenAmber replaces the Itho Amber heat pump controller with an ESP32 running ESPHome; the ESP32-P4 build uses a WIZnet W5500 for wired Home Assistant control.
OpenAmber: Open-Source ESP32 Heat Pump Controller With W5500 Wired Ethernet
ElenaLeeViews 279
Comments 0
ESP32-S3 and W5500 controller that bridges FRC arena WebSocket PLC data to HUB counters, relays, and addressable LEDs.
ESP32-S3 + W5500 FRC Arena HUB Controller
josephsrViews 195
Comments 0
A full-stack access control platform linking STM32 door hardware to MQTT, with optional W5500 Ethernet, Wi-Fi, RFID, fingerprint, and remote control.
STM32 Smart Access Control with Optional W5500 Ethernet
josephsrViews 208
Comments 0
ND-PicoDMX-System pairs a Raspberry Pi Pico with a WIZnet W5500 that receives Art-Net and sACN; dual-core firmware and PIO drive four DMX512 outputs at 40 Hz.
How Does a W5500 Pico Node Drive Four DMX512 Ports from Art-Net and sACN at 40 Hz?
BenjaminViews 208
Comments 0
Ooznest board support in grblHAL/ESP32 routes Telnet, WebSocket, FTP and WebUI over a W5500 SPI Ethernet link on the ESP32-S3, with Wi-Fi compiled alongside.
Why Did CNC Vendor Ooznest Choose W5500 Ethernet for Its grblHAL ESP32-S3 Board?
BenjaminViews 238
Comments 0
Surat factory WiFi is unreliable, so the EaseEmbro MES gives its ESP32-S3 fingerprint terminal a W5500 wired Ethernet option. The platform runs 33 factories.
Why Did EaseEmbro Put a W5500 Wired Option in Its ESP32-S3 Attendance Terminal?
BenjaminViews 181
Comments 0
Native ethernet: config for WIZnet W6100 SPI and W6300 PIO QSPI on RP2040/RP2350, merged by Home Assistant developer bdraco and shipped in ESPHome 2026.4.0.
What Does ESPHome Support for W6100 and W6300 Ethernet Add on RP2040 and RP2350?
BenjaminViews 258
Comments 0
A WIZnet W5500 on the arm's master RP2040 Pico carries TCP and UDP motion commands from the Arduino UNO Q host, using WIZnet's own ioLibrary socket API.
Which Ethernet Chip Connects an Arduino UNO Q to a 6-Axis Robot Arm? The W5500
BenjaminViews 189
Comments 0
A peer-reviewed 2026 paper wires an ESP32, three PZEM-004T sensors, and a W5500 Ethernet module into the BMKG Sleman station LAN to log 3-phase kWh in MySQL.
How Does a W5500 Wired ESP32 Monitor 3-Phase Power at a BMKG Geophysics Station?
BenjaminViews 171
Comments 0
Full hardware TCP/IP stack, eight sockets, a dedicated 32 KB buffer, 80 MHz SPI. UCF Group 21 wrote the comparison down, then measured the chip on its bench.
Why the W5500 Beat the ENC28J60 and AX11001 in a UCF Animatronic Trade Study
BenjaminViews 208
Comments 0
AmeNote ProtoZOA's NetworkMIDI2_Bridge connects USB MIDI 2.0 devices to Network MIDI 2.0 over wired Ethernet using an RP2040 and a WIZnet W5500 expansion board.
How to Bridge Network MIDI 2.0 with W5500 on RP2040?
viktorViews 201
Comments 0
PIXPAPER-213-C is a 2.13-inch, four-color electronic paper display that can be driven from the WIZnet W6300-EVB-Pico2 under Zephyr RTOS
How to Drive a PIXPAPER-213-C Display on W6300-EVB-Pico2 with Zephyr?
viktorViews 163
Comments 0
CRANTROL is an ESP32-S3 and W5500 Ethernet remote control platform with 10-channel relay control, Flutter mobile app, Firebase sync, and captive portal setup.
CRANTROL: W5500-Based IoT Control Platform
irinaViews 212
Comments 0
BASIX is an open-hardware PIC18 controller integrating W5500 Ethernet, RS-485, isolated I/O, analog inputs, relays, EEPROM, and RTC for automation.
BASIX Board with W5500
irinaViews 172
Comments 0
protective-stop
protective-stop
TheoImViews 296
Comments 0
Higenis HG-ESP32-S3-RLY4-PRO + W5500: an ESP32-S3 industrial controller that drives real relays over UDP via SPI Ethernet.
ESP32-S3 High-Current 4-Channel Relay Controller + W5500 UDP Relay Control Demo and Source Code
TheoImViews 252
Comments 0
STM32H5-W6300 (Hygenis Board) Firmware OTA and Web Server Bootloader Project
STM32H5-W6300 - Firmware OTA & WebServer
TheoImViews 252
Comments 0
This project presents a STM32F4 + WIZnet W6100 framework for IPv6 communication using UDP.
How to Implement IPv6 UDP Communication with W6100 on STM32F4?
markViews 166
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?