UCC

TLS/SSL Ethernet WebServer, HTTP Client and WebSocket Client library

STM32 Ethernet Module

Port of the WIZnet W5100 to the ESP-IDF. This is a test app that runs the basic esp-idf mqtt/ssl and esp_http_client examples over the W5100

Embedded rust support for the Wiznet W5500 SPI internet offload chip

This application is used for detecting number of parking spaces and arranging spaces for car parking based on spaces availability.

An efficient e-learning simulation web based tool for a virtual lab for electronics measurements using labVIEW for distance learners.

This project helps to detect the forest fire and send the message to the respective department to take action

Home security project based on atmega and ardunio. MQTT gateway for data gathering.

Demonstration of UDP/IP communication over WiFi while operating EtherCAT master with ESP32 + W5500

This project shows a wireless controller between tally light devices and user ATEM tool

connection example between ESP32 and W5500 for http client based on Micropython

The aim of this project is to provide an FPGA implementation of the Phasor Estimation algorithm in this paper: https://ieeexplore.ieee.org/d

It is impossible to imagine the future without the phrase, the Internet of Things. Marked by the interconnection of intelligent everyday.

As the load-sensitive multi-way valve is being used more widely, its performance is becoming more and more important in the hydraulic system

[W5100S] W5100S Transmission Speed Test (W5100S -> PC)

a device that can collect information from any device controlled by PLC and store it in the cloud using GPRS or Wi-Fi.

[W5100S] Complete the bootloader using W5100S

development of a device that is capable to measure and store the electrical characteristics of security systems

In order to train the workers of power stations, a simulation system of the fire-fighting equipment manual-control-pad is designed.

makes periodic checks and then waits for the owner’s decision to either allow the system to repurchase these products via Ethernet

sophisticated method of monitoring human body parameters like temperature, heartbeat rate, SPO2 using embedded web server and LabVIEW tech

APP obtains MAC address of W5500 using APMACBind and then performs MQTT communication with W5500

W5500 Ethernet Shield (Raspberry Pi Pico) Server + Wizfi360 WiFi Module (Raspberry Pi Pico)Client Passes Temperature Measurement Data

Port the mbedtls library so that the W5500 can connect to the MQTT server in SSL mode