Custom W5500-based Modbus TCP client enables EM540 energy meter integration with Victron Cerbo GX and VenusOS.
How to Connect an EM540 Energy Meter to VenusOS Cerbo GX with W5500
jakelee
Views 281

Comments 0
Hardwired TCP/IP Ethernet controller chip with an SPI interface.
1,618 projects, page 13 of 68
Custom W5500-based Modbus TCP client enables EM540 energy meter integration with Victron Cerbo GX and VenusOS.
How to Connect an EM540 Energy Meter to VenusOS Cerbo GX with W5500
jakeleeViews 281
Comments 0
A portable cable tester using Pico W and W5500 MACRAW mode to capture LLDP frames and display connected switch info — manufacturer, port, and IP — on a 2×16 LCD
Pico-LLDP
Grace_KooViews 305
Comments 0
Bruce Lam's Go LwM2M server covers CoAP, DTLS-PSK, registration, read/write, and observe flows, with W5500 Ethernet tested through Zephyr.
How Can W5500 Ethernet Validate a Go LwM2M Server for Edge Routers?
BenjaminViews 375
Comments 0
ESP32 firmware uses W5500 Ethernet for local REST, MQTT, and Redfish control of a home server, router, and NAS from TV and web dashboards.
How to Control a Server with ESP32 and W5500 Ethernet?
BenjaminViews 375
Comments 0
AI-powered sheath current monitoring using STM32F407 and W5500 for real-time analysis, fault detection, and predictive maintenance.
Sheath-Current-Acquisition
TheoImViews 278
Comments 0
a Modbus TCP Server, also known as a Modbus TCP Slave, on an STM32 microcontroller using the WIZnet W5500 Ethernet controller
STM32 + W5500 Modbus TCP Server: A Practical Ethernet Reference for Industrial Devices
sophiaViews 401
Comments 0
공장이나 설비에서 들어오는 ON/OFF 신호를 8개까지 읽어서 Ethernet으로 보내는 장치
W5500 + FreeRTOS-Based 8-Channel Industrial Digital Input Acquisition Module
sophiaViews 368
Comments 0
ESP32-Watchman
ESP32-Watchman
masonViews 508
Comments 0
M5-Devices-ACE
M5-Devices-ACE
masonViews 495
Comments 0
waveshare_lct_industrial_server
waveshare_lct_industrial_server
masonViews 414
Comments 0
esp32-deskflow-client
esp32-deskflow-client
masonViews 397
Comments 0
Weidos is a Weidmuller open-source industrial IoT controller family using W5500 Ethernet with Arduino MKR1010 or ESP32 cores.
How Does Weidmuller Weidos Use W5500 Ethernet for Open-Source Industrial IoT?
BenjaminViews 433
Comments 0
Greenox DeltaVision separates AI vision planning from W5500 Ethernet motion control in an INR 750,000 3-axis pick-and-place system.
How Does Greenox DeltaVision Use W5500 Ethernet for AI Vision Delta Robots?
BenjaminViews 825
Comments 0
Four AVR microcontrollers and a WIZnet W5500 Ethernet chip power this cashless vending machine; 10 units were deployed at Rajasthan IT Day 2017.
How Does a Smart Vending Machine Authenticate Purchases Over Ethernet with WIZnet W5500?
BenjaminViews 267
Comments 0
The Sensoper SC-G8 is an ESP32 industrial controller that, alone in its GSM series, adds wired Ethernet via the WIZnet W5500 next to GSM/LTE and RS-485 Modbus.
How to Add Wired Ethernet to an ESP32 Industrial GSM Controller: Sensoper SC-G8 with WIZnet W5500?
BenjaminViews 364
Comments 0
OneFader turns a volume control slider into Ethernet-based lighting control data using sACN, OSC, and Sig-Net protocols.
OneFader
Aimee0Views 216
Comments 0
AR22 LCU v1.1 adds W5500 TCP logging to an STM32F446 gamma detector, streaming live dose-rate JSON without disturbing the core firmware.
AR22 LCU: W5500 Ethernet TCP Dose Logging on a Dual-Range STM32F446 Radiation Detector
BenjaminViews 849
Comments 0
W5500 Ethernet connects an ESP32-C3 Zigbee coordinator to a Raspberry Pi MQTT broker, letting XBee3 relay nodes switch AC loads reliably without Wi-Fi.
How to Build a Zigbee Smart Switch System with W5500 Ethernet Backhaul on ESP32-C3?
BenjaminViews 752
Comments 0
W5500LinuxDriver
W5500LinuxDriver
masonViews 482
Comments 0
An STM32F407 and WIZnet W5500 UDP echo server on FreeRTOS, using the ioLibrary hardware sockets with interrupt-driven receive over SPI.
How to Build an Interrupt-Driven W5500 UDP Server on STM32F4 with FreeRTOS and ioLibrary
BenjaminViews 544
Comments 0
A Zephyr example using nRF9151 cellular and W5500 wired Ethernet together, solving the offload vs native socket conflict with the Socket Dispatcher.
How to Use Both Cellular and Ethernet in a Single Zephyr App with nRF9151 + W5500
Grace_KooViews 243
Comments 0
A tiny lighting bridge stacking a W5500 PoE base on an M5Stack Atom Lite to convert Art-Net and DMX512 both ways, powered over a single LAN cable.
M5AtomPoeArtnet2DMX
Grace_KooViews 338
Comments 0
SmartGarden
SmartGarden
masonViews 331
Comments 0
A PoE dual mmWave multisensor with confirmed ESP32-S3 and W5500 Ethernet configuration, supporting presence detection, environmental sensing, and Home Assistant
R PRO-1 PoE dual mmWave Multisensor (LD2450 | additional LD2412 optional)
matthewViews 437
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?