Filla IQ
Filla IQ
Aimee0
Views 350

Comments 0
Hardwired TCP/IP Ethernet controller chip with an SPI interface.
1,545 projects, page 15 of 65
Filla IQ
Filla IQ
Aimee0Views 350
Comments 0
Open-source Drone-in-a-Box system that links Home Assistant alarms with MAVLink drones for automated patrols, live monitoring, and secure dock control.
drone_hass
Aimee0Views 229
Comments 0
Building Room-Level Presence Detection with a Wi-Fi-Independent BLE Scanner: PadSpan HA with ESP32-S3 + W5500
padspanHA
Aimee0Views 252
Comments 0
aily-blockly-libraries
aily-blockly-libraries
Aimee0Views 234
Comments 0
A handheld ESP32-S3 diagnostic tool that captures LLDP frames over W5500 Ethernet, parses neighbor and VLAN data, and displays it with touch-driven ping tests.
ESP32-S3 LLDP Monitor with W5500 Ethernet, Touch UI, and On-Device Ping
josephsrViews 344
Comments 0
ROR_Controller
ROR_Controller
masonViews 310
Comments 0
tinyplayer
tinyplayer
masonViews 273
Comments 0
RollerShutter_Arduino_MQTT_Home_Assistant
RollerShutter_Arduino_MQTT_Home_Assistant
masonViews 319
Comments 0
ArtGateOne_2
ArtGateOne_2
masonViews 338
Comments 0
ESP32-S3-ETH Devkit에서 ESP-IDF를 활용하여 W5500 기반 Ethernet을 설정하고, 안정적인 유선 네트워크 환경을 구축하는 과정을 다룹니다.
Setting Up W5500 Ethernet on ESP32-S3 Using ESP-IDF
sophiaViews 360
Comments 0
ESP32-shield-module-W5500-RS485
ESP32-shield-module-W5500-RS485
masonViews 387
Comments 0
An ESP32-C6 gateway uses the W5500 to bridge a CAN-based smart home network to an MQTT cloud.
MySmartHouse3
TheoImViews 275
Comments 0
A DIY PoE access panel built on WIZnet W5500 + ESP32-S3, featuring 3D face, vein, and fingerprint auth via ESPHome and Home Assistant.
A PoE Smart Access Panel Powered by W5500 — From 3D Face Recognition to Vein Authentication
Grace_KooViews 487
Comments 0
Open-source KiCad PCB design for a 4-universe ArtNet LED controller with RP2040, W5500, USB-C charging, and JLCPCB assembly support
2040-ArtNode: RP2040 + W5500 ArtNet LED Controller Board
BenjaminViews 462
Comments 0
This project is a hardware design for an autonomous wheeled vehicle main control board built around the STM32 Nucleo F446RE.
How to Add Wired Telemetry and Vehicle I/O Control with W5500 on STM32 Nucleo F446RE?
viktorViews 407
Comments 0
This project is a compact sub-control board for an autonomous wheeled vehicle that uses a Seeed XIAO SAMD21, a WIZnet W5500 Ethernet module
How to Bridge Ethernet Commands to SBUS with W5500 on Seeed XIAO SAMD21?
viktorViews 269
Comments 0
A Managed Industrial Edge Device with W5500-Based Ethernet, an ESP32-linked Wi-Fi path, LTE-M/NB-IoT, and obnizOS
obniz Intelligent Edge Kilo
matthewViews 340
Comments 0
WLED usermod that receives DDP pixel data over W5500 Ethernet while using WiFi for relay control
TheBreeze: W5500 Ethernet DDP Receiver for WLED
BenjaminViews 390
Comments 0
Building a commercial game show venue — need the most reliable microcontroller setup for buzzers + LEDs +Ethernet
Building a commercial game show venue — need the most reliable microcontroller setup for buzzers + L
gunnViews 274
Comments 0
Akihabara Robot Pedestrian Paradise
秋葉原ロボットほこ天
gunnViews 249
Comments 0
This utility model packages protection, power-quality monitoring, line-loss analysis, and mixed wired/wireless links into a modular field unit built for service
Modular Distribution Protection Controller with WIZnet W5500 and Multi-Role Expansion
josephsrViews 286
Comments 0
DOMIX — Open Source Modular Home Automation System
DOMIX — Open Source Modular Home Automation System
Aimee0Views 355
Comments 0
RoboRacing uses W5500 Ethernet on Arduino boards for TCP/UDP control across an autonomous racing car.
roboracing-firmware
TheoImViews 282
Comments 0
ESP32 Poly-Phase Power Meter
ESP32 Poly-Phase Power Meter
scottViews 355
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?