Build an Ethernet-Powered IoT Camera with HTTPS / MQTT
W6300-EVB-PICO2 board streaming OV2640 camera images to Adafruit IO for real-time web dashboard viewing.
0
Similar projects you might like
Web Radio Control's GPL-3.0 azimuth rotator firmware added W6300 support on 2026-08-04. PlatformIO default_envs names W6300-EVB-Pico2 before two Wi-Fi Picos.
Why Does This Open-Source Antenna Rotator Firmware Build for W6300-EVB-Pico2 First?
Benjamin-
Views 150
-
Comments 0
SSH Stamp turns W6300-EVB-Pico2 into a secure UART bridge and improves MACRAW reliability for Embassy.
SSH Stamp: Secure Remote UART Access with W6300-EVB-Pico2
Grace_Koo-
Views 150
-
Comments 0
W5500/W6100 support in ESP-IDF opens the door for deeper WIZnet–Espressif collaboration, including Hardwired TCP/IP and W6300.
Espressif Adds Official W6100 Ethernet Driver Support to ESP-IDF
jakelee-
Views 295
-
Comments 0
WebSocket on a WIZnet ESP SoM. TCP runs on the Ethernet chip, not the MCU. Same firmware on W5500 or W6300 - one menuconfig switch, no porting.
WebSocket on the WIZnet ESP SoM: the MCU never runs TCP
TheoIm-
Views 382
-
Comments 0
Modbus TCP slave plus a live web dashboard on a WIZnet ESP SoM. Change the IP from the browser. Same firmware on W5500 or W6300, one menuconfig switch.
Modbus TCP on the WIZnet ESP SoM, re-addressable from a browser
TheoIm-
Views 397
-
Comments 0
Waveshare's RP2350-POE-ETH pairs the dual-core RP2350A with WIZnet's W6300 hardwired TCP/IP controller and an onboard RJ45, with optional 802.3af PoE.
Waveshare RP2350-POE-ETH: RP2350A + WIZnet W6300 Ethernet Board with Optional PoE
ElenaLee-
Views 222
-
Comments 0
The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems
How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?
viktor-
Views 246
-
Comments 0