Send Email with GMail and attach a file from SD
1
WIZnet - W5500
x 1
The sketch demonstrates how to send an email with an attachment using an STM32 microcontroller and a W5500 Ethernet module. It uses the EMailSender library for email functionality and an SD card to store the attachment.
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Aimee0
Views 69
Comments 0
Upstream MicroPython fix keeps an active W5500's SPI bus alive through soft reset on STM32 with lwIP, qualified with 60 resets and 20 upload cycles.
Why Did a MicroPython Soft Reset Hang an STM32 with a W5500, and How Does PR #19800 Fix It?
ElenaLee
Views 79
Comments 0
Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.
How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?
ElenaLee
Views 149
Comments 0
An open-source Source Measure Unit (SMU) designed for high-precision voltage/current sourcing and measurement with SCPI-based remote control via W5500 Ethernet.
vibepcb-smu
gunn
Views 68
Comments 0
There seems to be a lot of confusion (and a range of prices) surrounding the WizNet W5500-based Ethernet module we use for the RP23CNC.
Understanding WizNet W5500 for Your CNC Projects
sophia
Views 87
Comments 0
The Forlinx OKMX9352-C already has two native Gigabit Ethernet ports, so adding a WIZnet W5500 is not about compensating for insufficient processing power
How to Add a Third Ethernet Interface with W5500 on the Forlinx OKMX9352-C?
viktor
Views 56
Comments 0
Zephyr-Ethernet-Stress-Test is a small, focused tool: it pushes the W5500 driver with realistic concurrent traffic and records exactly where it fails
Hardening Zephyr's W5500 Driver: An Open-Source Ethernet Stress Test
viktor
Views 72
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
