Collection of MCU board firmware implementations
Collection of MCU board firmware implementations
0
Collection of MCU board firmware implementations
0
Native ethernet: config for WIZnet W6100 SPI and W6300 PIO QSPI on RP2040/RP2350, merged by Home Assistant developer bdraco and shipped in ESPHome 2026.4.0.
What Does ESPHome Support for W6100 and W6300 Ethernet Add on RP2040 and RP2350?
BenjaminViews 258
Comments 0
W5500/W6100 support in ESP-IDF opens the door for deeper WIZnet–Espressif collaboration, including Hardwired TCP/IP and W6300.
Espressif Adds Official W6100 Ethernet Driver Support to ESP-IDF
jakeleeViews 328
Comments 0
KST W6100-POE V4.0: IPv4/IPv6 지원 W6100 기반 PoE Ethernet 카드
KST W6100-POE V4.0 Ethernet Card
sophiaViews 295
Comments 0
A high-performance actuator control platform combining TI C2000 and W6100 to deliver 100 μs real-time positioning, fault diagnostics, and Ethernet connectivity.
ATTLA_T
TheoImViews 297
Comments 0
MESHBULLET is a DIY Meshtastic node that gives a Pico 2 (RP2350) a wired Ethernet and PoE uplink with WIZnet wiz850io or W6100, in a 3D-printed tube.
MESHBULLET: How to Add Wired Ethernet and PoE to a Meshtastic RP2350 Node with WIZnet W6100
BenjaminViews 689
Comments 0
An open-source retro SBC built on the W65C816 CPU, using WIZnet W6100 to add hardwired TCP/IP Ethernet connectivity.
X65_BigMiST
Grace_KooViews 323
Comments 0
The A2560Me pairs a Motorola MC68LC060 with WIZnet's W6100 and WizFi360, offloading IPv4/IPv6 TCP/IP to hardware on a 66 MHz legacy CPU.
Foenix Labs A2560Me Brings MC68LC060 CPU, FPGA Graphics, and PCIe Expansion
Grace_KooViews 440
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?