NTRIP Receiver with WIZnet WizFi360 and Teensy
High-speed NTRIP receiver built with Teensy 4.1 and WizFi360 Wi-Fi module. Achieves RTK Fix within 10 seconds compared to ESP8266’s tens of seconds.
0
Project description
Software Apps and Online Services Arduino IDE ChatGPT (code generation support) u-center (u-blox GNSS configuration & monitoring) RTCM3 protocol Tags WizFi360 Teensy 4.1 RTK NTRIP GNSS DESCRIPTION Project Overview This project demonstrates building an NTRIP receiver using a WizFi360 Wi-Fi module and a Teensy 4.1 board. Compared to the traditional ESP8266-based solution, which required tens of seconds to reach an RTK Fix, this new combination achieves Fix within 10 seconds under good conditions. The performance improvement is due to WizFi360’s fast UART throughput (1 Mbps) and straightforward…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
