Lihan__

MQTT over WIZnet Ethernet with automatic Wi-Fi failover, on ESP-IDF.

And your app needs no OTA code of its own. The update logic lives in a partition that is never overwritten.

This content summarizes the process of configuring QSPI between the ESP32-S3 and W6300, analyzing waveforms, reading registers, and completing a loopback test.

Ethernet performance comparison between ESP32-S3 with WIZnet TOE and LWIP using iperf tests

Ported the W5500 to the “Geekble Nano” board created by the YouTuber Geekble, which is based on the ESP32-S3.

This project implements a transparent Ethernet bypass node using two W6300 chips in MACRAW mode, forwarding Ethernet frames between two ports via the RP2350.

This project explains how to configure dual Ethernet interfaces on the RP23450 using the W6300 and ioLibrary, and also presents a loopback test example with the

Ethernet Traffic Monitoring, Blocking Specific IPs, and Custom Firewall Configuration for Network Management Applications

This guide explains how to set up the W55RP20 development environment on Ubuntu, build examples, and verify functionality.

Uses ARP to collect IP address of devices on the local network and visualizes network usage by parsing packets via port mirroring