ArtNet_Pico2_WS2811

ArtNet → WS2811 bridge for WIZnet W6300-EVB-Pico2 — 8 parallel LED universes via RP2350 PIO + DMA

Lihan__

Published May 10, 2026

86 UCC

10 WCC

5 VAR

Original author: SilvanOriginal source (new tab)

Project description

ArtNet → WS2811 Bridge — Driving 8 LED Universes from a Single W6300-EVB-Pico2 #ArtNet #WS2811 #DMX #W6300 #RP2350 #Pico2 #PIO #DMA #LEDWall #StageLighting 🎭 Real-time stage-lighting bridge firmware on WIZnet W6300-EVB-Pico2. 8 parallel ArtNet universes, 40fps, zero-CPU LED output — all on a single board. 01 — What is this project? LED walls and stage-lighting installations speak ArtNet — a DMX-over-Ethernet protocol that lighting consoles, media servers, and visual software (MadMapper, Resolume, QLC+) use to push pixel data across a network. To turn that network traffic into actual light…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

SSH Stamp turns W6300-EVB-Pico2 into a secure UART bridge and improves MACRAW reliability for Embassy.

SSH Stamp: Secure Remote UART Access with W6300-EVB-Pico2

Grace_Koo

Views 122
Comments 0

W5500/W6100 support in ESP-IDF opens the door for deeper WIZnet–Espressif collaboration, including Hardwired TCP/IP and W6300.

Espressif Adds Official W6100 Ethernet Driver Support to ESP-IDF

jakelee

Views 253
Comments 0

WebSocket on a WIZnet ESP SoM. TCP runs on the Ethernet chip, not the MCU. Same firmware on W5500 or W6300 - one menuconfig switch, no porting.

WebSocket on the WIZnet ESP SoM: the MCU never runs TCP

TheoIm

Views 332
Comments 0

Modbus TCP slave plus a live web dashboard on a WIZnet ESP SoM. Change the IP from the browser. Same firmware on W5500 or W6300, one menuconfig switch.

Modbus TCP on the WIZnet ESP SoM, re-addressable from a browser

TheoIm

Views 326
Comments 0

Waveshare's RP2350-POE-ETH pairs the dual-core RP2350A with WIZnet's W6300 hardwired TCP/IP controller and an onboard RJ45, with optional 802.3af PoE.

Waveshare RP2350-POE-ETH: RP2350A + WIZnet W6300 Ethernet Board with Optional PoE

ElenaLee

Views 169
Comments 0

The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems

How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?

viktor

Views 188
Comments 0

A production-grade firmware architecture that brings together MQTT, Wiegand readers, RS485 devices, I2C LCD, RTC, and SD card storage — all running on a single

Building an Industrial Access Control Gateway with WIZnet W6300-EVB-Pico2

lawrence

Views 565
Comments 0