UCC

Control smart devices like LEDs and sensors via a web interface using WIZnet's W5500 Ethernet controller and STM32.

This is a project to build a voice control system using an Arduino and an Ethernet Shield WIZnet module.

Using an Ethernet shield, you can use an Arduino as a web server.

Web Relay Con V2.0 HW-584 Network Module 8/16 Channel Relay Controller ENC28J60 – Reprogramming Demo

An end-to-end embedded web server built from scratch on a custom PCB — serving a login page and an Industrial IoT dashboard straight out of Flash memory, with z

A 6-Channel Arduino Ethernet I/O Control Server with SD-Based Web UI

Wire a WIZ550io to an Arduino Nano, update the Ethernet library for W5500, then run the WebServer example to verify wired networking.

Build a nostalgic Arduino webserver using the WIZnet W5500 shield and a DS18B20 sensor to serve live temperature over HTTP.

Using an Arduino with an Ethernet shield, the project demonstrates creating a web server to control devices like LEDs and servos.

Learn to access an Arduino's SD card website, control pins via webpage, with prior experience recommended.

A blog post by WIZnet Chip user, nexp, who crafted the STM32F4-RP board using the STM32F417Z, and transmits images to a web server via the W

#74 Web Enable your Arduino (ENC28J60 or W5100 Ethernet Controller)

Over 10 steps, it shows how to set up Web server based on Arduino.