UCC

STM32F103 and W5500-based Ethernet monitoring system that displays button and switch status on an LCD and web browser in real time.

If you want to add a simple oscilloscope, basic signal generation and spectrum analysis to your workbench, this inexpensive Network Connected Signal Analyzer (N

Wind controllers are fancy but expensive and their output signals have a too coarse resolution in time and their scope of application is too confined and they a

Meshtastic firmware powers off-grid LoRa mesh devices, while selected WIZnet-enabled boards add Ethernet services for API, time sync, and gateway-style roles.

CueB Gen 2 is an Ethernet-based cue light system that delivers real-time signals between stage managers and production crews in live performance environments.

ETH WIZ 3 click 870 projects

DryNoMore

A server-side Ethernet design uses a primary path, a standby path, and fault detection to reduce service interruption during link or switch failure.

HomeThread combines a Thread Border Router, Ethernet backhaul, and dashboard control for embedded home network management.

Remote lens control with mini servo and OSC

Tutorial-W6300-EVB-PICO2

W6300-EVB-PICO2 board streaming OV2640 camera images to Adafruit IO for real-time web dashboard viewing.

ESP32-C3 signal tower controller for infrastructure alerts: ESPHome-based logic, heartbeat supervision, and validated W5500 Ethernet for wired status indication

Arduino Ethernet

High-precision NTP server on ESP32 + W5500 using GPS PPS discipline, MCPWM hardware capture, and ARP-aware transmit timing

A complete IoT-based cashless canteen system using Arduino Nano + W5500 for secure card provisioning and ESP32 Wi-Fi for wireless payment processing.

W5500 Encorder

Weather-Station-IOT-Project

STM32 + W5500 이더넷 칩 설정을 통한 MQTT 통신 구현 Implementation of MQTT Communication via STM32 + W5500 Ethernet Chip Configuration (Part 2)

eBUS Adapter Shield v5

his project explains the network architecture and source code structure of the .mkit-web HTTP service used in the MIoTKit ecosystem.

ArduinoIDE環境でW5500-EVB-PICOを使う　サンプルスケッチ

This project explains how an embedded device can implement MQTT communication using the WIZnet W5500 Ethernet controller.

Teensy 3.2 reads pulse/hand sensors, drives solenoid timing, and sends OSC over UDP via WIZ850io or WiFi (ESP8266). Static IP 188.0.1.x. UDP