SzufladaV2 is a ROS2 Jazzy rover control stack that splits responsibilities cleanly: an ESP32 handles low-level motor I/O and sensors
How to Bridge a ROS2 Jazzy Rover to Wired Ethernet with W5500 on ESP32?
viktor
Views 518
Comments 0
UCC
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,102 projects
Docker-deployed Telegram bot infers building power status from ESP32 heartbeats, stores in SQLite, notifies users, and exposes a read-only HTTP status API.
PowerBot: Telegram Power Status Bot with ESP32 Heartbeats and Read-Only Status API
josephsrViews 434
Comments 0
A PROFINET device-stack evaluation port aimed at running on MCUs with lwIP for demo/testing.
MCU Port of P-Net PROFINET Device Stack Using lwIP
josephsrViews 337
Comments 0
3d-joystick-controller
3d-joystick-controller
masonViews 503
Comments 0
KSP-Controller
KSP-Controller
masonViews 467
Comments 0
StEth-Boot
StEth-Boot
masonViews 426
Comments 0
Custom PCB with STM32F407 and W5500 for remote MQTT control of satellite LNB polarization, DiSEqC motor positioning, and IF signal routing over Ethernet.
TM32F407 + W5500: Ethernet-Connected DiSEqC Satellite Motor Controller
BenjaminViews 480
Comments 0
This repository implements an ESP32-based home theater controller that relies on a hardwired Ethernet link (WIZnet W5500 over SPI)
How to build a wired TLS WebSocket home theater controller with WIZnet W5500 on ESP32 (ESP-IDF)?
viktorViews 706
Comments 0
This project uses the ESP32-S3-POE-ETH board (Waveshare) with ESP-IDF framework to create a WiFi-Ethernet SSL bridge
esp32-wifi-bridge
viktorViews 338
Comments 0
ESP32_AdBlocker is an Arduino-based DNS sinkhole that blocks ads and trackers by answering blocked DNS queries with 0.0.0.0,
How to Run a DNS Ad Blocker with W5500 Ethernet on ESP32-S3?
viktorViews 672
Comments 0
The eth-w5500 project packages WIZnet’s W5500 (SPI Ethernet) into an ESP-IDF-friendly component with a small, struct-based API
How to Integrate WIZnet W5500 SPI Ethernet on ESP-IDF for ESP32?
viktorViews 574
Comments 0
PierVibrationSensor is an embedded vibration-monitoring node built around a Raspberry Pi Pico 2 W and a WIZnet W5500 Ethernet interface.
How to Monitor Structural Vibration with W5500 on Raspberry Pi Pico 2 W?
viktorViews 376
Comments 0
ESP32-DCU-Rev1
ESP32-DCU-Rev1
masonViews 353
Comments 0
How Browser Policy Changes Are Reshaping Embedded TLS Design
HTTPS化(マイコンＨＴＴＰサーバー)
scottViews 305
Comments 0
An ESP32-based OCPP 1.6J Central System can sit between an EV wallbox and your home energy manager.
How to build an ESP32 OCPP 1.6J Central System with W5500 Ethernet?
viktorViews 700
Comments 0
STM32F103C8T6 (Blue Pill) + W5500 Multi-Display IoT Starter
How do you control Ethernet, LCD, and LED Matrix all at once with a $1 STM32 Blue Pill?
BenjaminViews 479
Comments 0
Vajravolt VVM701
Vajravolt VVM701
AlanViews 474
Comments 0
A Linux-based system brings puppets to life by synchronizing servo movements with audio. ESP32 network nodes with W5500 Ethernet enable scalable, real-time cont
Open-Source Animatronic Puppet Control System with Distributed Network Nodes
Lihan__Views 497
Comments 0
ESPHome 🧠 MultiSensor Board
ESPHome MultiSensor Board
AlanViews 590
Comments 0
An ESP32 relay controller combining WiFi and W5500 wired Ethernet on a single-layer PCB.
ESP32-Based 8-Channel Relay Control System with W5500 Ethernet LAN
Lihan__Views 550
Comments 0
MockingBoard + Uthernet II = Music!
MockingBoard + Uthernet II = Music!
jadenViews 334
Comments 0
STM32L152 + ESP32 Wroom 보드
STM32L152 + ESP32 Wroom 보드
jadenViews 381
Comments 0
This project implements a 4-channel cloud-controlled switch using the OneNET cloud platform and the HTTP protocol.
How to Build a Reliable HTTP-Based Cloud Switch Controller with W5500 and OneNET?
ronpangViews 336
Comments 0
W5500-EVB-PICO is an evaluation board that combines the RP2040 microcontroller with the WIZnet W5500 Ethernet controller.
How Does W5500-EVB-PICO Enable Reliable Ethernet Networking for RP2040 Projects?
ronpangViews 331
Comments 0
