ESP32_AdBlocker is an Arduino-based DNS sinkhole that blocks ads and trackers by answering blocked DNS queries with 0.0.0.0,
How to Run a DNS Ad Blocker with W5500 Ethernet on ESP32-S3?
viktor
Views 568

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,084 projects
ESP32_AdBlocker is an Arduino-based DNS sinkhole that blocks ads and trackers by answering blocked DNS queries with 0.0.0.0,
How to Run a DNS Ad Blocker with W5500 Ethernet on ESP32-S3?
viktorViews 568
Comments 0
The eth-w5500 project packages WIZnet’s W5500 (SPI Ethernet) into an ESP-IDF-friendly component with a small, struct-based API
How to Integrate WIZnet W5500 SPI Ethernet on ESP-IDF for ESP32?
viktorViews 500
Comments 0
PierVibrationSensor is an embedded vibration-monitoring node built around a Raspberry Pi Pico 2 W and a WIZnet W5500 Ethernet interface.
How to Monitor Structural Vibration with W5500 on Raspberry Pi Pico 2 W?
viktorViews 337
Comments 0
ESP32-DCU-Rev1
ESP32-DCU-Rev1
masonViews 330
Comments 0
How Browser Policy Changes Are Reshaping Embedded TLS Design
HTTPS化(マイコンHTTPサーバー)
scottViews 277
Comments 0
An ESP32-based OCPP 1.6J Central System can sit between an EV wallbox and your home energy manager.
How to build an ESP32 OCPP 1.6J Central System with W5500 Ethernet?
viktorViews 648
Comments 0
STM32F103C8T6 (Blue Pill) + W5500 Multi-Display IoT Starter
How do you control Ethernet, LCD, and LED Matrix all at once with a $1 STM32 Blue Pill?
BenjaminViews 417
Comments 0
Vajravolt VVM701
Vajravolt VVM701
AlanViews 442
Comments 0
A Linux-based system brings puppets to life by synchronizing servo movements with audio. ESP32 network nodes with W5500 Ethernet enable scalable, real-time cont
Open-Source Animatronic Puppet Control System with Distributed Network Nodes
Lihan__Views 453
Comments 0
ESPHome 🧠 MultiSensor Board
ESPHome MultiSensor Board
AlanViews 582
Comments 0
An ESP32 relay controller combining WiFi and W5500 wired Ethernet on a single-layer PCB.
ESP32-Based 8-Channel Relay Control System with W5500 Ethernet LAN
Lihan__Views 498
Comments 0
MockingBoard + Uthernet II = Music!
MockingBoard + Uthernet II = Music!
jadenViews 308
Comments 0
STM32L152 + ESP32 Wroom 보드
STM32L152 + ESP32 Wroom 보드
jadenViews 359
Comments 0
This project implements a 4-channel cloud-controlled switch using the OneNET cloud platform and the HTTP protocol.
How to Build a Reliable HTTP-Based Cloud Switch Controller with W5500 and OneNET?
ronpangViews 305
Comments 0
W5500-EVB-PICO is an evaluation board that combines the RP2040 microcontroller with the WIZnet W5500 Ethernet controller.
How Does W5500-EVB-PICO Enable Reliable Ethernet Networking for RP2040 Projects?
ronpangViews 294
Comments 0
This project demonstrates an RP2040-based embedded system using the WIZnet W5500 Ethernet controller to achieve reliable, wired TCP/IP communication.
How to Build a Stable Ethernet-Based Industrial IoT Node with RP2040 and W5500?
chenViews 364
Comments 0
W5500 and new network tab
W5500 and new network tab
gunnViews 352
Comments 0
Teensy 4.1 - W5500 using SPI DMA
Teensy 4.1 - W5500 using SPI DMA
gunnViews 361
Comments 0
ESP-NODE-2RDM is an ESP32-S3 Art-Net v4 / sACN (E1.31) node that outputs two DMX512/RDM ports with multi-source merging. It uses a WIZnet W5500 SPI-Ethernet.
How to Build a Dual-Port Art-Net v4 / sACN to DMX512/RDM Node with WIZnet W5500 on ESP32-S3?
viktorViews 1219
Comments 0
This article explains how to debug common Ethernet failures when using the WIZnet W5500 with STM32 microcontrollers.
How Do You Debug Common W5500 Failures on STM32?
ArnoldViews 513
Comments 0
This project builds a pro-grade Art-Net (UDP) to WS2812 controller on RP2350, driving 12,288 LEDs across 12 outputs at 30+ FPS.
High-Performance ArtNet to WS2812 Controller
viktorViews 387
Comments 0
This article explains how an STM32 microcontroller communicates with the WIZnet W5500 Ethernet controller through SPI at the register level.
How Does STM32 Communicate with W5500 at the Register Level?
ArnoldViews 352
Comments 0
This article explains how to bring up Ethernet networking on the W5500-EVB-Pico using a static IP configuration.
How Do You Bring Up Ethernet with a Static IP on W5500-EVB-Pico?
ArnoldViews 452
Comments 0
C11-P04-F04-SE_RAMP
C11-P04-F04-SE_RAMP
TheoImViews 316
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?