Build a serverless, distributed smart home using WIZnet W5500 and Souliss. Achieve high reliability with a "Network is the Brain" architecture. No cloud needed!
souliss
irina
Views 271

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,084 projects
Build a serverless, distributed smart home using WIZnet W5500 and Souliss. Achieve high reliability with a "Network is the Brain" architecture. No cloud needed!
souliss
irinaViews 271
Comments 0
SA5 links Snap! and Arduino via Firmata over TCP with a WIZnet W5100, enabling remote GPIO, PWM, servo, and I2C control on a LAN.
SA5
TheoImViews 290
Comments 0
This project uses the WIZnet W5500 in MACRAW mode to build a USB-to-Ethernet storage bridge. A microcontroller appears as a USB flash drive to legacy TV
tvserver
TheoImViews 434
Comments 0
BetaFMS
BetaFMS
Aimee0Views 293
Comments 0
Altium으로 설계한 W5500 Ethernet 모듈 DIY (2-Layer PCB + 3D 모델)
DIY W5500 Ethernet Module in Altium (2-Layer PCB + 3D Models)
sophiaViews 408
Comments 0
PlatformIO와 lwIP로 구현한 W5500 Ethernet Driver
W5500 Ethernet Driver with PlatformIO and lwIP
sophiaViews 453
Comments 0
ESP32-AIO-AG is an ESP32-S3-based All-in-One board firmware for AgOpenGPS-compatible autonomous steering.
ESP32-AIO-AG
Aimee0Views 363
Comments 0
OmniDriver
OmniDriver
Aimee0Views 294
Comments 0
STM32F103 and W5500-based Ethernet monitoring system that displays button and switch status on an LCD and web browser in real time.
BTNqwe
Aimee0Views 279
Comments 0
If you want to add a simple oscilloscope, basic signal generation and spectrum analysis to your workbench, this inexpensive Network Connected Signal Analyzer (N
Network Connected Signal Analyzer
Sunny_Views 278
Comments 0
Wind controllers are fancy but expensive and their output signals have a too coarse resolution in time and their scope of application is too confined and they a
Space Whistle - wind controller - musical IoT
Sunny_Views 268
Comments 0
Meshtastic firmware powers off-grid LoRa mesh devices, while selected WIZnet-enabled boards add Ethernet services for API, time sync, and gateway-style roles.
Meshtastic Firmware
matthewViews 479
Comments 0
CueB Gen 2 is an Ethernet-based cue light system that delivers real-time signals between stage managers and production crews in live performance environments.
CueB
Aimee0Views 289
Comments 0
ETH WIZ 3 click 870 projects
ETH WIZ 3 click 870 projects
jadenViews 395
Comments 0
DryNoMore
DryNoMore
masonViews 408
Comments 0
A server-side Ethernet design uses a primary path, a standby path, and fault detection to reduce service interruption during link or switch failure.
Dual-Link Ethernet Redundancy Circuit
josephsrViews 298
Comments 0
HomeThread combines a Thread Border Router, Ethernet backhaul, and dashboard control for embedded home network management.
HomeThread: Embedded Thread Border Router with Ethernet Backhaul and Dashboard
josephsrViews 446
Comments 0
Remote lens control with mini servo and OSC
Remote lens control with mini servo and OSCRemote lens control with mini servo and OSC
irinaViews 348
Comments 0
Tutorial-W6300-EVB-PICO2
Tutorial-W6300-EVB-PICO2
matthewViews 375
Comments 0
W6300-EVB-PICO2 board streaming OV2640 camera images to Adafruit IO for real-time web dashboard viewing.
Build an Ethernet-Powered IoT Camera with HTTPS / MQTT
matthewViews 332
Comments 0
ESP32-C3 signal tower controller for infrastructure alerts: ESPHome-based logic, heartbeat supervision, and validated W5500 Ethernet for wired status indication
ESP32 Industrial Signal Tower Controller
matthewViews 411
Comments 0
Arduino Ethernet
Energy Management Model for Griffith Foods in Costa Rica, based on ISO 50001:2018
brunoViews 309
Comments 0
High-precision NTP server on ESP32 + W5500 using GPS PPS discipline, MCPWM hardware capture, and ARP-aware transmit timing
GPS-Disciplined Stratum-1 NTP Server with W5500 Hardware Timestamping
BenjaminViews 471
Comments 0
A complete IoT-based cashless canteen system using Arduino Nano + W5500 for secure card provisioning and ESP32 Wi-Fi for wireless payment processing.
PUSIT: RFID Canteen Payment System Powered by W5500 Ethernet and ESP32 Wi-Fi
BenjaminViews 496
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?