meshems-sunspec-gateway
meshems-sunspec-gateway
Aimee0
Views 131

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,555 projects
meshems-sunspec-gateway
meshems-sunspec-gateway
Aimee0Views 131
Comments 0
ESP32-S3 Commercial Access-Control Controller with W5500 Ethernet
Commercial ESP32-S3 Access-Control Controller with W5500
sophiaViews 153
Comments 0
Not just another Art-Net node — a network DMX node and a live diagnostic tool. Watch all 512 channels update in real time in your browser, get warned the instan
LuxDMX V2
Sunny_Views 167
Comments 0
Fast MicroPython driver for GC9A01 display modules written in C Topics
GC9A01 Display Driver for MicroPython
Sunny_Views 124
Comments 0
PACE HMI: Connecting the RAMMP Robotic Wheelchair via RTPS with ESP32-P4 and W5500
PACE HMI: Connecting the RAMMP Robotic Wheelchair via RTPS with ESP32-P4 and W5500
Aimee0Views 149
Comments 0
This project implements a BLE sensor concentrator on the Nordic nRF52840 DK and adds a wired TCP uplink through a WIZnet W5500 connected over SPI
How to Add W5500 Ethernet to a Zephyr BLE Concentrator on nRF52840?
viktorViews 147
Comments 0
Internet radio player for the Nintendo GameCube - Icecast/SHOUTcast MP3 streaming over the DOL-015 Broadband Adapter
gcradio
Sunny_Views 106
Comments 0
A MAC No Factory Ever Issued — How Six ESP32-S3 Boards Share One W5500 Address
ivan-bohun
scottViews 183
Comments 0
wireless-ac-automation-esp32
wireless-ac-automation-esp32
masonViews 181
Comments 0
ZoneTherm combines seven OpenTherm thermostats, configurable valve groups and W5500 Ethernet for local zone control and Home Assistant integration.
How Does ZoneTherm Use W5500 to Connect Seven OpenTherm Heating Zones?
BenjaminViews 216
Comments 0
An ESP32 thesis project uses W5500 Ethernet, a FreeRTOS queue and MQTT acknowledgements to explore electrical telemetry timing.
How Can an ESP32 and W5500 Separate Meter Polling from MQTT Telemetry?
BenjaminViews 261
Comments 0
Clock 2 combines GNSS timing, an ESP32-S3 and W5500 Ethernet to serve local NTP time, with PoE power, OLED status and browser diagnostics.
How Does Clock 2 Turn GNSS Pulses Into a W5500 Ethernet Time Server?
BenjaminViews 187
Comments 0
JimBoHa turns a Waveshare ESP32-S3 W5500 relay board into a BACnet/IP node with priority-aware relays, signed OTA, a browser installer and a passed 24 h soak.
How Can W5500 Give Eight Relays and Inputs a BACnet Management Interface?
BenjaminViews 217
Comments 0
https://github.com/nandibrenna/Beremiz4uC
Beremiz4uC
Grace_KooViews 146
Comments 0
A wired Zephyr weather node on a board Zephyr has no definition for, and the four DHCP settings it took to survive a cable pull.
Why Does a W5500 Board Get Its Address Back After a Cable Pull but Not Its DNS?
Grace_KooViews 142
Comments 0
Zephyr's in-tree W5500 driver is MACRAW only. This repo adds an out-of-tree socket-offload driver on the chip's hardware TCP/IP.
How Does a Zephyr Driver Use W5500 Hardware TCP/IP When the In-Tree One Is MACRAW Only?
Grace_KooViews 183
Comments 0
Wired MQTT escape-room control on W5500-EVB-Pico2, using the WIZnet MicroPython build whose release ships both LWIP and TOE images.
Why Does an Escape Room Run Its W5500 Boards on MicroPython?
Grace_KooViews 148
Comments 0
https://github.com/mchristegh/sam-bridge
sam-bridge
Grace_KooViews 123
Comments 0
A rope encoder on a moving projection screen streams OSC at 201 Hz over W5500, after the CircuitPython driver proved call-bound.
Why Was the CircuitPython W5500 Driver Stuck at 99 Messages a Second?
Grace_KooViews 152
Comments 0
Four UDP echo builds on one NUCLEO-H723ZG, measured for an hour each: W5500 hardware offload against MACRAW and the STM32's own MAC.
How Much Does W5500 Hardware Offload Save Over MACRAW on the Same Board?
Grace_KooViews 193
Comments 0
One industrial gateway written in C and again in Rust on the same STM32F407 and W5500, reconciled by the same 93-test e2e suite.
How Do You Prove a Rust Rewrite Matches the C Firmware It Replaces?
Grace_KooViews 171
Comments 0
https://github.com/christophebelmont/Flow.io-Waveshare
Flow.io-Waveshare
TheoImViews 210
Comments 0
An ESP32-S3 reads a LiFePO4 BMS over BLE and publishes it as MQTT over a W5500 PoE link, where Node-RED turns it into a Victron virtual battery.
esp32poeLarsBatMon
TheoImViews 208
Comments 0
An Industrial Motor Controller Built with STM32 and W5500 — RS-485 and Ethernet Behind One Register Map
Motor Controller with PID, Modbus RTU and Modbus TCP
scottViews 174
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?