A high-performance actuator control platform combining TI C2000 and W6100 to deliver 100 μs real-time positioning, fault diagnostics, and Ethernet connectivity.
ATTLA_T
TheoIm
Views 238

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,084 projects
A high-performance actuator control platform combining TI C2000 and W6100 to deliver 100 μs real-time positioning, fault diagnostics, and Ethernet connectivity.
ATTLA_T
TheoImViews 238
Comments 0
Repository dedicated to storing tests and experiments carried out with the STM32G0B0RET6 and the W5500 using the MQTT protocol.
STM32_MQTT_Project
scottViews 332
Comments 0
STM32F103 + W5500 MQTT IoT Sensor Node
W5500-STM32-cJSON
scottViews 322
Comments 0
Generic firmware for ESP32-S3-POE-ETH-8DI-8DO and ESP32-S3-POE-ETH-8DI-8RO (possibly others as well, but untested)
Generic Waveshare
Sunny_Views 193
Comments 0
This is an intelligent access control management system.
Smart Door Access System
Sunny_Views 223
Comments 0
A portable cable tester using Pico W and W5500 MACRAW mode to capture LLDP frames and display connected switch info — manufacturer, port, and IP — on a 2×16 LCD
Pico-LLDP
Grace_KooViews 221
Comments 0
Bruce Lam's Go LwM2M server covers CoAP, DTLS-PSK, registration, read/write, and observe flows, with W5500 Ethernet tested through Zephyr.
How Can W5500 Ethernet Validate a Go LwM2M Server for Edge Routers?
BenjaminViews 295
Comments 0
ESP32 firmware uses W5500 Ethernet for local REST, MQTT, and Redfish control of a home server, router, and NAS from TV and web dashboards.
How to Control a Server with ESP32 and W5500 Ethernet?
BenjaminViews 294
Comments 0
ETH WIZ 3 Click provides Ethernet connectivity with integrated dual-core processing and hardware TCP/IP networking
ETH WIZ 3 Click provides Ethernet connectivity with integrated dual-core processing and hardware TCP
gunnViews 246
Comments 0
Scalable KVM Over IP Software Suite for Managing Servers and Remote Computers.
SKVMOIP
Lihan__Views 283
Comments 0
An ESPHome config that reads a Dutch DSMR 5 (P1) smart meter and feeds the signed per-phase grid power into the AstraMeter ct002 component, emulating a Marstek
ESPHome — DSMR P1 → AstraMeter CT002 (Marstek)
Sunny_Views 287
Comments 0
AI-powered sheath current monitoring using STM32F407 and W5500 for real-time analysis, fault detection, and predictive maintenance.
Sheath-Current-Acquisition
TheoImViews 223
Comments 0
a Modbus TCP Server, also known as a Modbus TCP Slave, on an STM32 microcontroller using the WIZnet W5500 Ethernet controller
STM32 + W5500 Modbus TCP Server: A Practical Ethernet Reference for Industrial Devices
sophiaViews 364
Comments 0
공장이나 설비에서 들어오는 ON/OFF 신호를 8개까지 읽어서 Ethernet으로 보내는 장치
W5500 + FreeRTOS-Based 8-Channel Industrial Digital Input Acquisition Module
sophiaViews 324
Comments 0
https://www.arduinolibraries.info/libraries/io-t-data-hub
IoTDataHub
brunoViews 178
Comments 0
Custom Tasmota firmware for Waveshare ESP32-S3-ETH-8DI-8RO / POE ??auto-built on new upstream releases
tasmota-waveshare-8di8ro
Sunny_Views 158
Comments 0
Lin bus reader and writer (automotive)
LIN
Sunny_Views 145
Comments 0
Using an ESP32 to control multiple PCs via Ethernet.
Wake-On-ESP32
Sunny_Views 152
Comments 0
Raspberry Pi Pico2 based Artnet Node written in Rust
OpenLumen Node
Sunny_Views 154
Comments 0
ESP32-Watchman
ESP32-Watchman
masonViews 443
Comments 0
M5-Devices-ACE
M5-Devices-ACE
masonViews 439
Comments 0
waveshare_lct_industrial_server
waveshare_lct_industrial_server
masonViews 335
Comments 0
esp32-deskflow-client
esp32-deskflow-client
masonViews 333
Comments 0
This project implements a multi-laser distance sensing and light control system on an Arduino Nano (ATmega328P).
Magician Main Board for Sensing Robot
brunoViews 312
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?