UCC

A SCADA-style UCC project using a P1AM-100 PLC with W5500 Ethernet, Modbus TCP, FastAPI middleware, React HMI, SQLite logging, PID, and safety interlocks.

ESP32-S3 Industrial IoT Gateway with Modbus RTU/TCP

An ESP32 paired with a WIZnet W5500 passively sniffs LLDP/CDP packets from the Ethernet cable

ROS 2 (Robot Operating System 2) is the de facto standard middleware for industrial robotics development

YaSolR is ESP32 Solar Router firmware that routes solar production excess to water heaters or resistive loads, with support for W5500 Ethernet boards.

ZMPT101B SCT013 ESP32 W5500 V2.0

Building a Drone Acoustic Detection System

ESP32-S3 + Module Ethernet W5500 Koneksi dengan MQTT

Two-tier LAN relay control by @anhtn1980 (developed in Vietnam). ESP32+W5500 web UI bridges TCP to an Arduino MEGA2560+W5500 driving 16 RS485 relays.

ADAS prototype: STM32+RPi FreeRTOS control (SCC/LFA/MCB), ported to a Telechips VCP-G board with W5500 Ethernet. Educational project.

OpenPLC natively supports W5100 and W5500 Ethernet controllers, enabling Modbus TCP on STM32 using the Arduino Ethernet API.

This commercial prototype architecture adds wired Ethernet to an ESP32 MicroPython device using WIZnet W5500 as the Ethernet controller.

This education-focused project explains how MicroPython MCU boards can use WIZnet W5500 to learn wired Ethernet through real register-level behavior.

This Industrial IoT architecture uses WIZnet W5500 to add wired Ethernet to MicroPython-capable MCU nodes used for local telemetry, service access, diagnostics,

This maker project architecture uses WIZnet W5500 to add wired Ethernet to MicroPython MCU boards such as ESP32-class platforms.

This Industrial IoT architecture uses WIZnet W5500 as a wired Ethernet controller for MCU-based field devices that need predictable TCP/UDP communication, servi

This robotics design uses WIZnet W5500 to add wired Ethernet to a MicroPython-based robot node

This commercial architecture explains how a MicroPython-based Ethernet product can use WIZnet W5500 as the wired network controller while making an explicit des

This maker-oriented architecture explains how to add wired Ethernet to a MicroPython MCU project using WIZnet W5500 as the network controller.

Eyes in the Sky: Building a 24/7 Aerostat Sensor Hub with Arduino Mega, ESP32, and WIZnet W5500

ZapTrace and the WIZnet W5500: AI-Native PCB Design with First-Class Ethernet Support

Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console confli

SRT-MGATE-1210: Industrial IoT Gateway for Modbus RTU/TCP with MQTT/HTTP cloud connectivity. ESP32-S3 based, BLE configuration, OTA updates. v1.0.0

A production-grade weather station firmware written in Rust targeting the STM32F407VGT6 MCU. It collects environmental data from multiple sensors and transmits