DIY Programmable Bench Power Supply (SCPI)
DIY Programmable Bench Power Supply (SCPI)
0
Components
Hardware components
Arduino - Arduino Due
x 1
WIZnet W5300
x 1
Texas Instruments Quad Comparator
x 2
Texas Instruments 555 Timers Ultra Low Voltage
x 1
3.2 inch 240x320 TFT with Touch panel
x 1
Silicon Labs Si8641EC-B-IS1
x 2
Arduino - Arduino IDE
x 1
EEZ Studio
x 1
Project description
The programmable bench power supply (PSU) is an attempt to bridge the gap between so many simple hobbyists/DIY power supplies and commercial solutions trying to combine the best ingredients and practice from both sides. The former solutions are in general open-source with a limited feature set and without support for some standardized way to communicate with them (e.g. SCPI). The later solutions are costly and not open (and easily "hackable").? This is an ongoing project and our aim is to provide a solution that is comparable to commercial solutions and it's completely open (software and…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.