We implemented the MoE Transformer in physical form on a Raspberry Pi.
0
WIZnet - W5500-EVB-Pico
x 3
Raspberrypi5 - RaspberryPI5
x 1
RaspberryPI 5
https://huggingface.co/blog/moe
A project inspired by the idea of creating a physical representation of the MoE.
Learn how to flash official MicroPython v1.23.0 firmware onto the W5500-EVB-PICO board. This enables full TCP/IP stack (TCP, UDP, DHCP, DNS) support
W5500-EVB-PICO with MicroPython: Firmware Flashing and Ethernet Setup on RP2040
ronpang
Views 671
Comments 0
Open-source KiCad PCB acting as a power distribution and SPI hub motherboard for W5100S/W5500-EVB-Pico, driving six LED lamp units in a university building-scal
Powering 57,000 LEDs: A Custom Motherboard for W5500-EVB-Pico
Benjamin
Views 510
Comments 0
UDP-based relay controller for a university rover—receives JSON commands over Ethernet and switches power to rover subsystems via W5500 EVB Pico.
METU ROVER Power Control: UDP Relay Switching with W5500 EVB Pico
Benjamin
Views 489
Comments 0
A Local Stratum-1 Time Infrastructure Powered by W5500
W5500-EVB-Pico+M5Stack用GPSユニット+TM1637でGPSNTPサーバを構築
scott
Views 474
Comments 0
A MicroPython-based NTP server that uses a GPS receiver as an accurate time source, serves time over Ethernet via the WIZNET5K (W5500).
How to Build a GPS-Synchronized NTP Time Server with W5500-EVB-Pico and MicroPython
Benjamin
Views 2350
Comments 1
WIZnet W5500-EVB-Pico 보드에서 ESPHome을 유선 이더넷으로 구동해 Home Assistant에 연결하는 예제 프로젝트
W5500-EVB-Pico + ESPHome: RP2040 유선 이더넷 스마트 노드( Home Assistant 연동 )
sophia
Views 449
Comments 0
Implements a Protocol Break Relay—a security pattern from the Cross Domain Solution (CDS) domain—using Rust on the W5500-EVB-Pico board.
How Does Rust Enable Protocol Break Security on W5500-EVB-Pico?
Benjamin
Views 855
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?