AI-enabled industrial IoT gateway with ESP32-S3, 4G LTE, GPS, isolated RS485/RS232, analog/digital inputs, relays, SD/SIM support, and optional Ethernet, LCD, c
Vajravolt AI IoT 4G LTE Industrial Gateway Board (VVM701)
TheoIm
Views 630

Comments 0
Hardwired TCP/IP Ethernet controller chip with an SPI interface.
1,617 projects, page 31 of 68
AI-enabled industrial IoT gateway with ESP32-S3, 4G LTE, GPS, isolated RS485/RS232, analog/digital inputs, relays, SD/SIM support, and optional Ethernet, LCD, c
Vajravolt AI IoT 4G LTE Industrial Gateway Board (VVM701)
TheoImViews 630
Comments 0
A compact breakout and Ethernet adapter board for the WaveShare RP2040-LCD-1.28, adding W5500-based wired network capability with familiar CircuitPython code.
Adding Ethernet to WaveShare RP2040-LCD-1.28 with a WIZnet W5500 Adapter Board
BenjaminViews 1781
Comments 0
A low-cost IoT gamma-ray spectrometer built with STM32F407 and WIZnet W5500, streaming real-time radiation spectra to a PC.
a Low-Cost IoT Gamma-Ray Spectrometer with the Easy-F407V-ETH (W5500) Board
TheoImViews 462
Comments 0
The client will connect to a TCP server, send data, and receive data back. We will test two types of servers.
STM32 W5500 TCP Client Tutorial
viktorViews 2865
Comments 0
Ethernet Controller: Implement TCP Client–Server using W5500 & STM32 MCU.
Ethernet Controller: Implement TCP Client–Server using W5500 & STM32 MCU.
BenjaminViews 1680
Comments 0
TCP_ServerW5500
TCP_ServerW5500
masonViews 989
Comments 0
STM32F446_W5500__FREERTOS
STM32F446_W5500__FREERTOS
masonViews 1318
Comments 0
The ST-W55RP20-C16 board, based on the structure of the WIZnet W5500-EVB-Pico, is an enhanced clone board that integrates the RP2040, W5500, and 16M flash.
ST-W55RP20-C16 – Pico Ethernet Evaluation Board
ssekimViews 471
Comments 0
.
esp32s3-8di8ro-controller
Aimee0Views 604
Comments 0
tcpServer
tcpServer
masonViews 322
Comments 0
.
Esparagus Audio Brick
Aimee0Views 909
Comments 0
An Ethernet expansion shield designed for the LILYGO T-Relay 4-Way and 8-Way development boards.
LILYGO® T-Relay-W5500 Ethernet Shield
sophiaViews 412
Comments 0
An advanced Ethernet library for Arduino that supports WIZnet W5500-based modules such as WIZ850io and WIZ550io.
Ethernet3 Library for WIZnet W5500
sophiaViews 417
Comments 0
In this tutorial, we’ll learn how to create a FreeRTOS-based TCP server using the STM32 and W5500 Ethernet module.
STM32 W5500 TCP Server with FreeRTOS (Non-Blocking Multi-Tasking Setup)
viktorViews 962
Comments 0
In this tutorial, we’ll take the next step and create a TCP server on STM32 using the W5500 module.
STM32 W5500 Ethernet Tutorial Part 2 – TCP Server in Blocking Mode
viktorViews 550
Comments 0
In this tutorial, we’ll learn how to connect and configure the W5500 Ethernet module with STM32 using SPI.
How to Interface W5500 Ethernet Module with STM32 via SPI
viktorViews 5558
Comments 0
w5500-ros2driver
w5500-ros2driver
masonViews 1354
Comments 0
The HiFi-ESP32 Plus represents the next evolution of HiFi-ESP32 boards, featuring the advanced PCM5122 DAC with built-in DSP capabilities
HiFi-ESP32 Plus
viktorViews 1436
Comments 0
ethernet-control-console
ethernet-control-console
masonViews 356
Comments 0
w5500-ethernet
w5500-ethernet
masonViews 302
Comments 0
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip.
Development Board Accessory Arduino, Ethernet Shield 2, Wiznet W5500, ARD-ADD ETH.SH.2
sophiaViews 314
Comments 0
A compact Ethernet tester for Flipper Zero using the WIZnet W5500, built by Cyberkid1987 with strong online engagement.
3.1K-View Flipper Zero Ethernet Tester (W5500)
sophiaViews 327
Comments 0
eBUS Adapter Shield C6
eBUS Adapter Shield C6
viktorViews 1794
Comments 0
EthernetRTL_BW16
EthernetRTL_BW16
viktorViews 2753
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?