Wizfi210 can't connect to IPhone AP

Question

Hi!, I’ve a Problem. When I’m trying to connect the Wizfi210 to an IPhone Hotspot with a WPA2 encryption an error occur. But when I am opening a Hotspot with an Android Phone with a WPA 2 encryption, the WI-FI Module can connect to the Hotspot and get a IP-Address from the DHCP Server. I am using the following comands to configure the WIFI module, so it can connect to an AP with WPA2 encryption. At [OK] AAttee00 [OK] AT+Xdum=0 [OK] AT+BDATA=1 [OK] AT+WD [OK] AT+NDHCP=1 [OK] AT+WPAPSK= , // SSID+ Password generate a PSK-key AT+WA=IPHONESSID [ERROR] So my question is : Did I forgot to configure something for the iPhone AP ? , or does the Wizfi210 doesn’t support iPhone Access Points. Thanks for helping. Best regards, WOLF

ssekim · Answer

Hello! As I know, IPhone AP run with 802.11g mode. But, WizFi210 associate to a AP with 802.11b.

WOLF · Answer

Hi ! Ok ,thanks. But in the requirements for using an iPhone Hotspot is written: To connect to a Personal Hotspot, your device requires: Wi-Fi: Support for 802.11g/n using WPA2 encryption. http://support.apple.com/kb/HT3574?viewlocale=en_US and in the Overview of the Wizfi 210 is written: Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b) http://www.wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=730&page=1&cate1=5&cate2=38&cate3=0&pid=1132&cType=2#tab I would interpret this as the Wizfi 210 can connect to an access point with 802.11b/g/n standard. Or did I miss something ? Best regards, WOLF

ssekim · Answer

Hi! Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b) Above means that WizFi210 can associate to a AP with 802.11b. So, if a AP doesn’t support 802.11b, Wizfi210 can’t associate to the AP.