Wizfi210 connect with arduino via Spi

Question

Hello, I need help, i have wizfi210 V1.0.1 i think firmware is 1.1.0.0 Does my Wizfi210 support SPI according to referrences above? I want connect it with arduino via SPI. Shield has some spi pins :MISO,SCK,CS,MOSI,GND,5V Can anyone explain me where to connect these pins ? If there is image of connection, please post it… I have read manuals and some of them said to use GPIO19 and connect to another GPIO on arduino but on shield i cant see the GPIO19 pin Also in the code which pins of wizfi20 are DRDY,CSB? WizFiShield connected to Arduino via SPI RST: pin 2 // Output DRDY: pin 3 // Input CSB: pin 4 // output MOSI: pin 11 // output MISO: pin 12 // input SCK: pin 13 // out I need to know the connection circuit of wizfi210 with arduino via SPI Sorry for my english…

ssekim · Answer

Hello toum Please refer to the below. There are some f/w versions about WizFi210. And you need WizFi210-SPI-F/W-version. [url]http://wizwiki.net/blog/2012/12/17/how-to-update-the-firmware-of-wizfi210-to-support-spi/[/url]