Arduino Ethernet Web Server with Relay
How to build an Arduino Ethernet web server that controls a relay
0
Components
Hardware components
Arduino - Arduino UNO
x 1
Arduino - Arduino Ethernet Shield
x 1
SunFounder - 2 Channel DC 5V Relay Module
x 1
Arduino - Arduino IDE
x 1
Project description
This post shows how to build an Arduino Ethernet web server that controls a relay that is attached to a lamp. You can access your web server with any device that has a browser and it’s connected to the same network. Ethernet shield The Arduino Ethernet shield connects your Arduino to the internet in a simple way. Just mount this module onto your Arduino board, connect it to your network with an RJ45 cable and follow a few simple steps to start controlling your projects through the web. Note : you must connect an Ethernet cable from your router to your Ethernet shield as shown in the…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
