How to use UART DMA RX on STM32F103 MCU
A reference example of protocol conversion between up to 2Mbps UART and Ethernet with WIZnet WIZ145SR which consists of STM32F103 and W5300
4
Components
Hardware componentsProject description
Story On the last post, I explained how to use UART DMA on STM32F103 MCU using HAL Library. I’ll explain how to use UART DMA RX here. First, thanks to Majerie Tilen and his tutorial and github repo regarding using UART DMA RX. His tutorial is very helpful for us to understand the mechanism of UART DMA RX on STM32 MCU. Why uses UART DMA RX When receiving a bulk data, using only interrupt may interfere MCU to process critical job due to a lot of interrupts. In this case, using UART DMA RX can reduce MCU intervention because only HT and TC interrupts occur even though how big data comes in…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
