Ethernet CAN Gateway
WIZnet Ethernet HAT Contest Winner Project
3
Components
Hardware components
WIZnet - W5100S-EVB-Pico
x 1
Microchip - MCP2515
x 1
WAVESHARE - General 0.91inch OLED display Module
x 1
GENIVI Alliance - CANdevStudio
x 1
QT Group - QCanBus
x 1
Project description
Overview There are many tools for controlling CAN devices. Among them, there is one of the open-source projects called Qt-based CANDevStudio. CANDev Studio uses a common plug-in called Qt CAN plug-in, which can be used on a Qt basis. However, there was no plug-in here between CAN and Ethernet heterogeneous protocols except Virtual. So, we wanted to create a plug-in that can be used on the Qt base and a gateway that can control CAN devices via Etherent through that plug-in, and that's the project. Component Diagram What should be done in the project was clear, as explained in Overview…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
