Aimee

ESPHome Integration Guide for WIZnet Ethernet (LwIP & TOE)

WSM Component Configuration Guide (Complete in 10 Minutes)

The W55RP20-S2E operates as an MQTTS client, connects securely to AWS IoT Core, and publishes and subscribes to configured topics.

The W55RP20-S2E operates as an MQTT client and publishes messages to, and subscribes to topics from, an MQTT broker.

The W55RP20-S2E is configured in SSL client mode via the UART or SPI interface and operates to exchange data with an OpenSSL server running on a PC.

The W55RP20-S2E is configured in HTTP Server mode via UART or SPI and operates to provide web pages when accessed from a PC.

The W55RP20-S2E is configured as an HTTP client via UART or SPI, enabling it to send GET requests to an HTTP server and receive responses.

Configures the W55RP20-S2E as a TCP server/TCP client/UDP via UART/SP and relays UART/SPI data from the module back to it transparently

Example for configuring W55RP20-S2E by sending commands entered through USB serial from Pico via (UART/SPI)

This is a troubleshooting guide based on issues from the WIZnet-Pico-C repository. https://github.com/WIZnet-ioNIC/WIZnet-PICO-C

This example shows how to implement an Ethernet-to-CAN converter using the W55RP20 EVB PICO board.

An example of sending and receiving data from CAN to a TCP client using the W55RP20-EVB-Pico.

This is an example of a uPnP protocol implementation.

This is an example of entering dormant mode and being woken up by WOL magic packet.

This is an example of a Netbios name service protocol implementation.

This is an example of entering sleep mode and being woken up by WOL magic packet.

This is an example of acting as an HTTP client using W55RP20-EVB-Pico.

This is an example of acting as an COAP client using W55RP20-EVB-Pico.

This is an example of acting as an COAP server using W55RP20-EVB-Pico.

This is an example of acting as an SMTP client using W55RP20-EVB-Pico.

This project is about COAP library in RP2040-HAT-FREERTOS-C.

This is about the QSPI driver using the PIO program of RP2040.

This project compare the performance between dual RP2040 and single RP2040 when transfer data to OpenSSL server.

This project is a test to compare the performance of two case. First is using two stm32, and Second is using one stm32 to send data over SSL.