Simple IoT LED Control with W55RP20-EVB-Pico

viktor

Published May 07, 2025

168 UCC

20 WCC

42 VAR

Original author: Syamil SafuanOriginal source (new tab)

Components

Hardware components

WIZnet - W55RP20-EVB-Pico

x 1

Project description

🔧 Project Overview This tutorial guides users through setting up the W55RP20-EVB-Pico development board to control three LEDs via TCP commands sent over a wired Ethernet network. It's an excellent starting point for those interested in exploring IoT concepts, especially using Ethernet-based communication.Cytron Technologies Malaysia 🧩 Hardware Components To build this project, you'll need: W55RP20-EVB-Pico board 3x LEDs 3x 220Ω resistors USB Type-C cable Ethernet cable Jumper wires Breadboard (optional)How2Electronics+14Cytron Technologies Malaysia+14Cytron Technologies+14Adafruit Learning…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

The W55RP20-S2E operates as an MQTT client and publishes messages to, and subscribes to topics from, an MQTT broker.

ioNIC MQTT Client Arduino Example

Grace_Koo

Views 577
Comments 0

The W55RP20-S2E is configured in SSL client mode via the UART or SPI interface and operates to exchange data with an OpenSSL server running on a PC.

ioNIC SSL Client Arduino Example

Grace_Koo

Views 508
Comments 0

The W55RP20-S2E is configured in HTTP Server mode via UART or SPI and operates to provide web pages when accessed from a PC.

ioNIC Web Server Arduino Example

Grace_Koo

Views 531
Comments 0

The W55RP20-S2E is configured as an HTTP client via UART or SPI, enabling it to send GET requests to an HTTP server and receive responses.

ioNIC HTTP Client Arduino Example

Grace_Koo

Views 496
Comments 0

This guide explains how to control the W55RP20-S2E module using a Raspberry Pi Pico and implement network loopback functionality.

ioNIC Loopback Arduino Example

Grace_Koo

Views 520
Comments 0

Example for configuring W55RP20-S2E by sending commands entered through USB serial from Pico via (UART/SPI)

ioNIC AT command Arduino Example

Grace_Koo

Views 514
Comments 0

This example demonstrates MQTTS(AWS) client on W55RP20 S2E via UART/SPI using MicroPython on a Raspberry Pi Pico (Master)

W55RP20-S2E MQTTS(AWS) client Example (MicroPython)

Grace_Koo

Views 803
Comments 0