Skip to content

Grove_WizFi360 + SNTP, GPIO CONTROL

Connecting the Grove_WizFi360, a serial transceiver module featuring WizNet's WizFi360 to PC and trying out some AT Commands.

viktor

Published October 19, 2022

168 UCC

20 WCC

42 VAR

Original author: Amal MathewOriginal source (new tab)

Grove_WizFi360 + SNTP, GPIO CONTROL

Components

Hardware components
WizFi360

WIZnet - WizFi360

x 1

Arduino UNO

Arduino - Arduino UNO

x 1

Project description

Story Grove - UART - WizFi360 is a serial transceiver module featuring the WizNet's WizFi360 WiFi module.With integrated TCP/IP protocol stack, this module lets your micro-controller interact with WiFi networks with only a few lines of code. Each WizFi360 module comes pre-programmed with an AT command set firmware, meaning you can send simple text commands to control the device. Connectivity is provided via 2.4Ghz wireless connection, WizFi360 is compatible with IEEE802.11 b/g/n standards and supports SoftAP, Station and SoftAP+Station modes. 1 / 3 Gather the Parts: Grove_WizFi360 Seeed…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.