UCC

This project demonstrates how to build a local smart home voice assistant using the XiaoZhi AI system with a WIZnet W5500 Ethernet controller.

This project explores how a local AI assistant system can achieve stable network connectivity using the WIZnet W5500 Ethernet controller.

pzem energy monitor firmware

This project demonstrates how an embedded device connects to an EMQX MQTT broker using the MIoTKit framework with a WIZnet W5500 Ethernet controller.

This project demonstrates how an embedded device connects to the Alibaba Cloud IoT platform using the MIoTKit framework with a WIZnet W5500 Ethernet controller.

https://github.com/IDTenev/water_link

This project demonstrates how a microcontroller can send telemetry data to an MQTT broker over wired Ethernet using the WIZnet W5500 Ethernet controller.

This article explains how a W5500-based embedded gateway controls a motor using MQTT communication over Ethernet.

https://github.com/wseaton/cloggo

https://github.com/MojitoShader/ESP32-MQTT-Weight-Modul

An open-source ESP32-S3/ESPHome 7-zone radiant heating controller with valve-feedback pump interlock, score-based failsafe logic, and real-time TFT monitoring.

How Does W5500 Enable Modbus Ethernet Communication in Embedded Systems?

An embedded control project for the fiber subsystem of HISPEC, a high-resolution spectrograph for the Keck Telescope

An open-source Flipper Zero FAP that adds wired Ethernet via WIZnet W5500 over SPI, with DHCP, Static IP, and Ping support.

This article explains how the MKIT W5500 network module enables Ethernet communication through a serial shell interface.

Rasber controller with customed built python project, including custom protocol and MODBUS support, and Android APP.

riocore

STM32 BluePill-based analog monitoring system using the WIZnet W5500 Ethernet module. Measures temperature, voltage, and current with external high-resolution A

ESP32 Ethernet Controller Comparison: W5500 vs DM9051ANX Performance and Design Analysis

ESP32 with W5500 logs Growatt RS485 Modbus data to ThingSpeak every 120s for stable wired solar monitoring.

STM32F4 firmware uses a W5500 Ethernet module to exchange micro-ROS messages over UDP (port 9999) and bridge CAN sensor data to ROS topics.

ESP32와 WIZnet W5500를 SPI로 연결해, Wi-Fi/MQTT/클라우드 없이 로컬 LAN에서 웹페이지 ON/OFF 버튼으로 릴레이(GPIO25)를 제어하는 이더넷 기반 IoT 예제

PER(Purdue Electric Racing)

ESPresense