wiring instructions for connecting a WIZnet W5500 Ethernet module to the M5Stack Cardputer ADV
Adding W5500 Ethernet to the Cardputer ADV with the Official Bruce Wiring Guide
sophia
Views 283

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,555 projects
wiring instructions for connecting a WIZnet W5500 Ethernet module to the M5Stack Cardputer ADV
Adding W5500 Ethernet to the Cardputer ADV with the Official Bruce Wiring Guide
sophiaViews 283
Comments 0
ESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
ESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
gunnViews 266
Comments 0
PBL-MK2025055SB001: Face Detection & Assembly Station SCADA — Where a Face Becomes the Access Key
PBL-MK2025055SB001-ESP32-ModbusTCP
scottViews 227
Comments 0
LoRa mesh networking platform designed to exchange text messages, location data, and telemetry without relying on Internet or cellular infrastructure
MESHCN Firmware: Extending an Off-Grid LoRa Mesh Network with W5100S Ethernet
sophiaViews 219
Comments 0
Migration guide to Zephyr v4.4.0
Migration guide to Zephyr v4.4.0
gunnViews 205
Comments 0
The Smart Farm System is an ESP32 and LoRa-based platform for monitoring cow health, location, activity, and milk quality.
How Could W5500 Ethernet Improve an ESP32 LoRa Smart Dairy Farm Gateway?
sophiaViews 182
Comments 0
This project modifies Bruce firmware for the M5Stack Cardputer ADV to support CC1101, NRF24L01, LoRa, and W5500 Ethernet modules on one portable device.
Cardputer ADV Multi-interface Expansion with CC1101, NR24L01, LoRa, and W5500 Ethernet
sophiaViews 324
Comments 0
Its controller board combines an RP2040 MCU with the WIZnet W5500 Ethernet controller and supports standard ATX power supplies and power-only SAS expanders.
OpenJBOD: An Open-Source Network-Managed JBOD Controller with RP2040 and W5500
sophiaViews 262
Comments 0
The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems
How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?
viktorViews 296
Comments 0
Open-Locker
Open-Locker
Aimee0Views 170
Comments 0
bitcoinswitch
bitcoinswitch
Aimee0Views 172
Comments 0
OpenThermal
OpenThermal
Aimee0Views 164
Comments 0
DuneOS
DuneOS
Aimee0Views 151
Comments 0
LAN interface for Boiler-System-Bus (BSB) and Local Process Bus (LPB) and Punkt-zu-Punkt Schnittstelle (PPS / H-Bus) used by Elco Thision, Brötje and similar he
BSB-LPB-PPS-LAN
Sunny_Views 161
Comments 0
Ultra-responsive ESPHome external component for the Nuki 5.0 Pro smart lock. Runs the BLE stack on a dedicated FreeRTOS task so the ESPHome main loop never bloc
Nuki 5.0 Pro
Sunny_Views 221
Comments 0
A rapid-prototyping platform for motors on the dual-core C2000 (F28P65x).
Viewer2000
Sunny_Views 138
Comments 0
IOT Data Aggregator
Fluidity
Sunny_Views 158
Comments 0
sg-sdk
sg-sdk
Aimee0Views 162
Comments 0
alc-app-s3
alc-app-s3
Aimee0Views 143
Comments 0
LoRaWAN으로 받은 명령을 W55RP20이 이더넷 TCP로 네트워크 LED 디스플레이에 전달하는, ESP32-S3(LoRa) + W55RP20(이더넷) 2단 브릿지 구조의 시스템
Can LoRaWAN Downlink Commands Control an Ethernet LED Display with W55RP20?
sophiaViews 202
Comments 0
This fully open-source desktop hardware is an AI running status indicator built on WizFi360-EVB-Pico (RP2040 + WizFi360 industrial WiFi module).
Step-by-Step Guide to Building an AI Operating Status Indicator [Fully Open-Source Breakdown]
ruilixin6Views 509
Comments 0
A lab simulator that reproduces atmospheric turbulence for free-space optical links, receiving channel data via W5300 hardware TCP/IP.
Design and Experimental Demonstration of an Atmospheric Turbulence Simulation System for Free-Space
Grace_KooViews 199
Comments 0
Intelligent-Cybersecurity-Framework-for-Smart-Grid-System-Security
Intelligent-Cybersecurity-Framework-for-Smart-Grid-System-Security
Lihan__Views 252
Comments 0
This project demonstrates a Matter-over-Ethernet device running on a stock Raspberry Pi Pico, a board without built-in Wi-Fi or Ethernet.
rs-matter-embassy
TheoImViews 256
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?