micro-ROS bridge on RP2040 + WIZnet W6100 forwarding ROS2 cmd_vel to a Sabertooth 2x60 motor driver, with Ethernet UDP transport planned.
SabertoothMicroROSBridge
Grace_Koo
Views 213

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,084 projects
micro-ROS bridge on RP2040 + WIZnet W6100 forwarding ROS2 cmd_vel to a Sabertooth 2x60 motor driver, with Ethernet UDP transport planned.
SabertoothMicroROSBridge
Grace_KooViews 213
Comments 0
ESP32-S3 AsyncWeb ETH + WiFi
PlatformIO - ESP32-S3-AsyncWeb-ETH-WIFI
sophiaViews 322
Comments 0
An open-source retro SBC built on the W65C816 CPU, using WIZnet W6100 to add hardwired TCP/IP Ethernet connectivity.
X65_BigMiST
Grace_KooViews 226
Comments 0
ESP32-S3 Ethernet + 4G RS485 DTU Box
ESP32-S3 Ethernet + 4G RS485 DTU Box
sophiaViews 324
Comments 0
ESP32-S3 + W5500 open-source soft router firmware with multi-WAN failover across LTE, Wi-Fi, and wired Ethernet.
MWRouter
Grace_KooViews 345
Comments 0
Universal camera recovery tool - shocking dead devices back to life
defib
Lihan__Views 568
Comments 0
Home Assistant integration for the SunRiser 8/10 LED aquarium controller.
ha-sunriser
Lihan__Views 321
Comments 0
ApiaryGuard Pro
ApiaryGuard Pro: Open-Source Enterprise Hive Monitoring with Raspberry Pi and WIZnet Ethernet
viktorViews 318
Comments 0
Network-attached PDU (Power Distribution Unit) controller for the Raspberry Pi Pico (RP2040), replacing the original PIC18-based firmware.
CroPDUster: Open-Source Network-Attached PDU Control with WIZnet Ethernet
viktorViews 269
Comments 0
WIZ750SR firmware moves from Keil to GNU ARM GCC and CMake, enabling reproducible open builds and easier community contribution.
gcc-cmake-build-wiz750sr
TheoImViews 293
Comments 0
.Built on MC68LC060 and Kintex-7 FPGA, the board combines legacy 68k computing with PCIe, DDR3, and extensive I/O for developers.
A2560Me Mini-ITX Retro Motherboard with 68k CPU and FPGA
Lihan__Views 238
Comments 0
This STC32G12K128 project uses the WIZnet W5500 Ethernet controller to obtain an IP address automatically through DHCP.
How to Use DHCP with WIZnet W5500 on STC32G12K128?
gavinchangViews 293
Comments 0
This STM32F10x education project demonstrates UDP multicast using the WIZnet W5500 Ethernet controller and WIZnet ioLibrary.
How to Build UDP Multicast with WIZnet W5500 on STM32F10x?
gavinchangViews 333
Comments 0
A lightweight SIP registrar/proxy server running on ESP32-S3, with W5500 Ethernet/PoE support for building small wired VoIP networks.
SipServer
matthewViews 881
Comments 0
An STM32F103 OTA bootloader that downloads firmware over W5500 Ethernet, stages it in W25Q64 flash, and installs it after CRC validation.
STM32_OTA_Bootloader_W5500
matthewViews 548
Comments 0
ESP32 firmware for JSY meters with dashboard, UDP, REST, Shelly emulation, and W5500 Ethernet builds.
ESP32 JSY Energy Meter Gateway with W5500 Support
BenjaminViews 487
Comments 0
A Web Serial flasher for QGate ESP32-S3 firmware with W5500 Ethernet, MQTT, NTP, and OTA evidence.
QGate Browser Flasher for ESP32-S3 and W5500 Ethernet
BenjaminViews 291
Comments 0
ArtNet → WS2811 bridge for WIZnet W6300-EVB-Pico2 — 8 parallel LED universes via RP2350 PIO + DMA
ArtNet_Pico2_WS2811
Lihan__Views 298
Comments 0
farm_env_sensor
farm_env_sensor
lawrenceViews 520
Comments 0
MicroNet is a lightweight network connection manager library for Arduino and PlatformIO
MicroNet
lawrenceViews 294
Comments 0
Identity Protocol - Part 10 - W5500 Ethernet
Identity Protocol - Part 10 - W5500 Ethernet
gunnViews 300
Comments 0
A bare-metal STM32 device uses WIZnet W5500 Ethernet and timer-based UDP RTT measurement to visualize WAN latency and jitter.
Hardware WAN Latency Analyzer with STM32 and WIZnet W5500
josephsrViews 291
Comments 0
DINO-PLC-V2
DINO-PLC-V2
scottViews 387
Comments 0
.
The New Packet Radio
Sunny_Views 197
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?